Jump to content
SAU Community

Recommended Posts

Had my 03 v35 auto coupe for about a month now. Great car, and a very smooth drive :D

Picked up on noises lately that I wasn't sure about.

First is at cold crank (usually overnight). Sometimes I get a rattle/crank noise when I start. I'm guessing this is an oil pressure problem of some sort? Rare to occur, but always in the morning. Only noticed it twice in the last week.

The other noise is a ticking noise in reverse only? This isn't the infamous axle clicking problem is it? Fairly light noise, only when I engage reverse and turning into a park. Sounds like its coming from the front. It's a similar sound to CV joints failing in fwd cars (but a hell of a lot fainter)!

The third noise has been deemed normal (thank god). The one when you first take off in D and get a funny noise once you reach 20kmph.

I'll have to try and record these noises at the right moment!

The rattle crank noise you are hearing is probably the starter, the spur gear not withdrawing from the ring gear in a timely fashion, hence the noise, mine does it and I'm not concerned.

For the other noise you are hearing I have no , could possibaly be as simple as a l stone caught in your tread, but I would get it checked out to be sure.

Had my 03 v35 auto coupe for about a month now. Great car, and a very smooth drive :(

Picked up on noises lately that I wasn't sure about.

First is at cold crank (usually overnight). Sometimes I get a rattle/crank noise when I start. I'm guessing this is an oil pressure problem of some sort? Rare to occur, but always in the morning. Only noticed it twice in the last week.

The other noise is a ticking noise in reverse only? This isn't the infamous axle clicking problem is it? Fairly light noise, only when I engage reverse and turning into a park. Sounds like its coming from the front. It's a similar sound to CV joints failing in fwd cars (but a hell of a lot fainter)!

The third noise has been deemed normal (thank god). The one when you first take off in D and get a funny noise once you reach 20kmph.

I'll have to try and record these noises at the right moment!

That is due to the oil pressure not building up fast enough to tension the timing chain's hydrulic tensioner. Reason why it happens in the morning is because most of the oil drains to the bottom of the engine. It's not an issue I'd be worried about - as long as the sound dis-appears stright away - if the sound is constant you could be using incorrect oil/time for an oil change or could mean an issue with the tensioner.

You might want to check the oil grade - I think the V-Series use 5w-30 oil.

For the ticking noise, maybe is the ball bearing of the wheel cause it, mine got the same problem, and will check it on monday... the garage guys said that 10 out of 8 customers with 350z or 350GT got the same problem. not expensive to fix.

I sometimes get the startup rattle as well on my 03 V35 coupe and could be caused by the VTC sprocket (gear for the Valve Timing).

From what I've read, it doesn't cause any damage to the engine and is mainly a noise issue.

As Iseekool has mentioned, an oil change should help.

if its a single click when reversing...then its the rear axle ...needs to be greased and rotated

otherwise if its a series of clicking noises...my guess would be brakes or wheel bearing

Hay, just got my V35 checked this afternoon, about the rear ticking noise, the mechanic disassembled the rear wheel rotors and check the wheel bearing, he's spotted nothing and i replace my rear brake pads and machined the rotors...

the noise is still there...=.= he said the car is mechanically okay maybe the shape of my 370Z 18'' wheels that i put on produce the sound by stirring up the air...so the (ticking like) sound appears at a slow speed but disappear later? i don't understand it.. so.. nothing solved LOL....

Anyone else got the same problem?

  • 1 month later...

Thought I'd update this. I've worked out that the reverse ticking noise only occurs when you ride the brake in reverse while turning the wheel (ie. Parallel park). Wierd! If I reverse without riding the brake, all is fine (still turning the wheel of course)...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...