Jump to content
SAU Community

Recommended Posts

No......no need for one here. Very little crime here. Only crime is drifting and racing. And I race.

One thing I did forgot to do was, pull the CAS out and spin it to see if my timing is out or it can be a ground somewhere. Sounds weird but, I seen weirder thing on aircraft. The garage I took it to has good rep. for fixing these types of problems, even if he is a mazda guy.

:headspin:

I got my car back yesterday. The guy found a chafed wire going from the ecu to the number one coil pack. He said what if one wire is go, the other 5 coil packs will not fire at all. He fix a few other thing as well too. Before I toke it in, had a ruff idle and now that is gone. The moter is real good now. I have wheel spin up to 3rd gear. I am happy to have my car back. Thank for everyone help. Trev

:P

  • 3 months later...

sorry to drag up an old thread, but Trev, where did he find the chaffed wire? Was it under the dash, or in the engine bay? where exactly?

My car is miss firing and running really rich. I've changed the CAS but that didn't help. I've got a spare igniter module which i hope is the problem. The diagnostic computer the mechanic had said Error 21 Ignition Signal Problem. Perhaps i have a bare wire that is shorting too. I might try a different coil pack loom.

Any tips would be sweet!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...