Jump to content
SAU Community

Recommended Posts

Extensively Modified Nissan skyline. C/F Bonnet $25000 engine package. Garrett T04Z Turbo, Power FC, cams, valves, porting. Upgraded brakes, clutch, fuel system, cooling. 307 rwkw 20psi Easy defects to clear to keep on long rego or Track Car. Under 1:10 Wakefield.

Many reciepts. Belts, brake pads, oil, spark plugs just changed.

All work carried out by Nissan specialist workshop Unique Autosports at Seven Hills.

Also included Sparco Sprint 5 seat with frame to factory mountings.

No audio installed (upgrade was planned) some work needed in interior, Switches and locks.

Besides that mechanically A1 and very straight. Genuine reason for regretful sale.

Will Neg for less minus wheels and tyres (other option).

I drive the car around on 6psi, it was tuned on 20psi and the previous owner safely had its as high as 28psi on 98 octane.

The previous owner had the engine rebuilt at Croyden Racing Developments where the turbo was fitted.

Since owning the car have added the aftermarket brakes, cancelled the troublesome 4 wheel steering. Also had the new 18 inch Enkei RPF1s with Pirelli high performance tyres ($3500). 1000km ago belts were changed, oil and coolant, spark plugs, fuel filter, water pump and a Nismo thermostat fitted along with an alloy radiator. I am also prepared to throw in a Sparco Sprint 5 seat with aftermarket mount for stock seat mount.

The car was defected for a loud exhaust so i had my mate Matt at Midas at Hornsby fit 2 new mufflers tp bring the exhaust down to 86 db.

The car was inspected and anti pollution devices were found to be tampered.

A free RTA emissions test needs to be done for it to be legal. The engine is not blowing any smoke and the exhaust is quite so the inspecting mechanic likes the chances of it passing after:

*The O2 (oxygen) sensor is reconnected

*Stock fuel pressure regulator fitted

*Stock turbocharger wastegate valve fitted

The other item (such as aftermerket cat and larger front mount intercooler) will be ticked off once the car passes the emission test.

The car was inspected by Barry at

Antella & Lloyd Pty Ltd

20-22 Babbage Rd

EAST ROSEVILLE

The inspection was around 3pm on Wenesday 11th August.

The cars interior is in tacked but not perfect. A drivers side window switch needs replacement and one button on the climate control is missing. Together both items $100 on ebay. A few rattles but i know they are just loose speaker wires. The drivers door and boot lock need to be calibrated to the key for passenger door lock and ignition (easily done by Locksmith).

There are 2 dents on the car and the outline of a sticker. The window were recently professionally retinted.

Although far from the worst R33 in terms of interior and bodywork the strength of the car is really in the drivetrain.

The car is For Sale at $9000 with the enkeis or $7500 with 19inch Lenso rims (very good condition) but they need tyres to be legal.

Dean.

Mobile: 0412 172 715

[email protected]

This car was featured in a GTS-T Shootout on the DVD Serious Performance 7 after in was brought into Australia and complied by Unique Autosports in 2002.

post-73334-1281690632_thumb.jpg

post-73334-1281690683_thumb.jpg

post-73334-1281690718_thumb.jpg

Edited by dean_lotus
Link to comment
https://www.sau.com.au/forums/topic/332850-600hp-r33-nissan-skyline/
Share on other sites

  • 2 weeks later...
Extensively Modified Nissan skyline. C/F Bonnet $25000 engine package. Garrett T04Z Turbo, Power FC, cams, valves, porting. Upgraded brakes, clutch, fuel system, cooling. 307 rwkw 20psi Easy defects to clear to keep on long rego or Track Car. Under 1:10 Wakefield.

Many reciepts. Belts, brake pads, oil, spark plugs just changed.

All work carried out by Nissan specialist workshop Unique Autosports at Seven Hills.

Also included Sparco Sprint 5 seat with frame to factory mountings.

No audio installed (upgrade was planned) some work needed in interior, Switches and locks.

Besides that mechanically A1 and very straight. Genuine reason for regretful sale.

Will Neg for less minus wheels and tyres (other option).

I drive the car around on 6psi, it was tuned on 20psi and the previous owner safely had its as high as 28psi on 98 octane.

The previous owner had the engine rebuilt at Croyden Racing Developments where the turbo was fitted.

Since owning the car have added the aftermarket brakes, cancelled the troublesome 4 wheel steering. Also had the new 18 inch Enkei RPF1s with Pirelli high performance tyres ($3500). 1000km ago belts were changed, oil and coolant, spark plugs, fuel filter, water pump and a Nismo thermostat fitted along with an alloy radiator. I am also prepared to throw in a Sparco Sprint 5 seat with aftermarket mount for stock seat mount.

The car was defected for a loud exhaust so i had my mate Matt at Midas at Hornsby fit 2 new mufflers tp bring the exhaust down to 86 db.

The car was inspected and anti pollution devices were found to be tampered.

A free RTA emissions test needs to be done for it to be legal. The engine is not blowing any smoke and the exhaust is quite so the inspecting mechanic likes the chances of it passing after:

*The O2 (oxygen) sensor is reconnected

*Stock fuel pressure regulator fitted

*Stock turbocharger wastegate valve fitted

The other item (such as aftermerket cat and larger front mount intercooler) will be ticked off once the car passes the emission test.

The car was inspected by Barry at

Antella & Lloyd Pty Ltd

20-22 Babbage Rd

EAST ROSEVILLE

The inspection was around 3pm on Wenesday 11th August.

The cars interior is in tacked but not perfect. A drivers side window switch needs replacement and one button on the climate control is missing. Together both items $100 on ebay. A few rattles but i know they are just loose speaker wires. The drivers door and boot lock need to be calibrated to the key for passenger door lock and ignition (easily done by Locksmith).

There are 2 dents on the car and the outline of a sticker. The window were recently professionally retinted.

Although far from the worst R33 in terms of interior and bodywork the strength of the car is really in the drivetrain.

The car is For Sale at $9000 with the enkeis or $7500 with 19inch Lenso rims (very good condition) but they need tyres to be legal.

Dean.

Mobile: 0412 172 715

[email protected]

This car was featured in a GTS-T Shootout on the DVD Serious Performance 7 after in was brought into Australia and complied by Unique Autosports in 2002.

SOLD SOLD SOLD

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...