Jump to content
SAU Community

Recommended Posts

Most catch cans only have 1 inlet 1 outlet, so for the ones where u need to attach 3+ hoses to it, do u just use a T piece etc?

The ones we use have 4 fittings, 2 inlet, 1 drain (outlet) and 1 filter. There is no reason why you couldn't use a T piece although a Y piece would be better for plumbing. :)

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Even with the pictures im still clouded as to which way i should use mine  

I found this photo, what does this setup offer?

This looks llike the 100% plumb back alternative. It is a little hard to see the PCV pipework, but I suspect that both the inlet and oulet for PCV is plumbed to the can. Certainly the inlet to the turbo is plumbed back, so it would makes sense if the PCV was similarly plumbed back.

Why are you still clouded? :(

For what it's worth here's my setup....figure out which one it is . Remember most bought catchcans have 1 inlet and 1 outlet the inlet should feed to the bottom of the can

http://www.skylinesaustralia.com/members/5...sCar/engine.jpg

As long as you block off the unused plumbing and fittings.  I gotta ask why though? :confused:

Well, we're recomending to block the PCV line on a vent to atmosphere setup, so if you block the plenum side of the PCV line, and use the PCV port on the side of the rocker cover, you get a very tidy catchcan setup with only one hose :(

This is the style of catch can we use. http://www.gcg.com.au/catalogue/Oil%20Filt...tor%20round.jpg

It has the 4 fittings;

*2 inlets on the side at the top (we run a piece of pipe to the bottom and then cover them with stainless steel wool, inserted via the large air filter fitting.)

*1 drain (outlet) at the bottom (we put a tap on this, so we can open it and drain it)

*1 filter on the top

Even with the pictures im still clouded as to which way i should use mine  

I found this photo, what does this setup offer?

This setup is the same as mine, it still vents to the plenum via the PCV valve when neg pressure is present in the plenum and vents via the catchcan to the turbo intake pipe when pos pressure is in the plenum....only diff is my catchcan is on the oposite side to shorten the tubing and looks tidier. There is no venting to atmosphere....it's on my street car....and legal :D

Yeh sweet that sounds perfect

Only thing is i want to block the PCV valve, seems to have all benefits and no disadvantages from doing so

So whats the best way to block the two holes/hoses? Im assuming just cut the hose going from the plenum to the rocker cover, and screw a bolt into the hose holes

i went to power diggers workshop in ingleburn today and the owner told me that the boost pressure source could be teed from the vaccum hose that runs from the throttle body to the air con canister.I didnt question it because ive had one on the car in that exact same location ever since i bought it, it had just been capped which means it can be located even closer again.:cheers::(:mad::mad:

A question about my proposed setup for an oil catch can.

1.In this picture you can see the pipe that goes from the plenum to the rocker cover.Now if i put a aftermarket pcv valve in the middle of this hose so pressure only travels to the rocker cover and not backwards to the plenum is this allright to do?

The catch can is rigged up the same as the one in the picture.

What i was thinking was that by putting the valve in there it would only flow air when on boost and when off would eliminate oil travel to the plenum when off boost.And the catch can setup should pretty much take care of the rest of the oil blowby on its way to the intake pipe.

tell me if i am wrong please.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...