Jump to content
SAU Community

Recommended Posts

This 1989 GTR has been my pride and joy for the last 6 years. I Imported the car in 2004 with 74000km's on it (currently has 96xxxkm on it) and slowly built it up from almost standard. It owes me over $60,000.

Photo's http://www.tradingpost.com.au/Automotive/U...ue&AdOnTop=

Series 3 R33 GTR Engine 50000Km, (installed less than 2000km ago)

Tomei Metal Head Gasket, (installed less than 2000km ago)

Apexi PowerFC PRO,

HKS 2530 Turbo's, (installed less than 2000km ago)

HKS Heavy Duty Actuators, (installed less than 2000km ago)

HKS Dump Pipes, (installed less than 2000km ago)

HKS Front Pipe,

De-Cat Pipe, (currently has compliance cat fitted but will come with decat aswell)

3.5 Inch Catback,

Tomei Type B Poncams 260/9.15 IN/EX, (installed less than 2000km ago)

Tomei Camgears, (installed less than 2000km ago)

Tomei Sump Baffle, (installed less than 2000km ago)

Tomei Oil Restrictors, (installed less than 2000km ago)

Sard 800cc Injectors, (installed less than 2000km ago)

Nismo 280 L/H fuel pump,

Nismo FPR,

Nismo GT LSD Pro 1.5 way Rear,

HKS GD MAX Twin Plate Clutch,

HKS Coilovers,

TRUST 600/300/110 Frontmount Intercooler,

GReddy Hard Pipe Kit,

Airinx/Gracer Twin Air Pods,

R33 GTST Air Flow Meters,

Nismo Radiator Cap,

Large Oil Cooler,

Remote Oil Filter Kit,

Front and Rear Strut Tower Braces,

GRID TS Dancer 4WD Controller (needs to be wired in),

19x9.5 Deep Dish Starcorp Impul Rims (265 tyres with 80% tread left),

N1 Rear Lip + Standard Wing,

N1 Bonnet Lip,

Recaro Drivers Seat,

Momo Steering Wheel,

Momo Gear Knob,

Apexi Boost Guage,

Autometer Monster Tach,

Clarion CD/MP3 Headunit,

Alpine speakers rear,

Polk/momo speakers front,,

Kenwood 12inch sub + Box and Amp (not installed),

Tuned and built and serviced by Croydon Racing Developments

Full major service performed by CRD (all fluids/belts/timing belt/gaskets and hoses replaced) Less than 2000km ago

R33 Engine purchased from Powerplay Imports with perfect compression

POWER 334 awkw / 448hp at all 4 wheels

$20000 slightly negotable

Contact Dave on 0418299842

Link to comment
https://www.sau.com.au/forums/topic/333424-89-r32-gtr-334awkw/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...