Jump to content
SAU Community

Recommended Posts

* Black Lenso D2r 18x9.5" +12 (bought march this yr), with just over 500kms use in new cond with no marks $1100

Also have tyres to suit, 255/35/18 and are all Run flats, 2xMichelin Pilot sports off the new M3 been told there $800-900 new, the other pair are bridgestone potenza re050a. At a guess they would have roughly 80-90% tread with slight camber wear $400

OR $1400 for the lot

* R32Rear parcel shelf 12mm chip board and black carpet to suit 6x9" speakers $20

* Ford EL thermo fans (have modified the shroud to try and make them fit but didn't work out) still usable in another setup $40

*Racepace adj cam gears $60

*Will also be selling my Power fc d-jetro soon (few months time) if anyone is interested

Have heaps of other left over parts from previous cars i've stripped eg. air con setups, power steering pumps, alternators, and more little bits and pieces.

Pick up only for large items from Eltham (melb) 30mins N.E. of the city

PM Q's or to [email protected] or call 0417 125 253 Cheers Elliot

post-18664-1282456574_thumb.jpg

post-18664-1282456593_thumb.jpg

post-18664-1282456916_thumb.jpg

post-18664-1282456935_thumb.jpg

post-18664-1282456976_thumb.jpg

post-18664-1282457001_thumb.jpg

post-18664-1282457049_thumb.jpg

post-18664-1282457070_thumb.jpg

post-18664-1282457095_thumb.jpg

hey elliot what do the cam gears suit?

Hey, there from an rb26, they'll fit rb20 and rb25's too, If you have Vct i think you lose the function of it with adj cam gears.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...