Jump to content
SAU Community

R34 Gt-t And New Bosch 044 Pump

avoiee

By avoiee,
in Engines & Forced Induction

 Share

Recommended Posts

avoiee Enthusiast

avoiee

Posted
Posted

So upgraded to Bosch 044 after that car needs three times trying to start running ! it seams like its not pumping fuel to injectors but after car starts everything is working great !

what can be the reason ?

And i cant even hear pump working, my mates are having same pumps they they are very loud, mine is quiter then standard ! nothing is wrong with pump olready got 320 at weals and its fine !

Thx

Link to comment
https://www.sau.com.au/forums/topic/334041-r34-gt-t-and-new-bosch-044-pump/
Share on other sites
Dale FZ1 Veteran

Dale FZ1

Posted
Posted
So upgraded to Bosch 044 after that car needs three times trying to start running ! it seams like its not pumping fuel to injectors but after car starts everything is working great !

Depending on how you plumbed the pump into the system, you may have eliminated the non return valve. Best approach for full flow, but you need to crank the engine once or twice (sometimes?) to prime the fuel system. Once the engine is shut down the pressure bleeds off again, requiring the priming crank.

Highly recommend that you check the voltage your pump is seeing too. An 044 likes/requires higher voltage than stock wiring provides in an R33, and I can't see things being any different with an R34.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tidi0x
      Wheel Sizes & Offsets For Skylines

      By tidi0x · Posted

      Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...