Jump to content
SAU Community

Recommended Posts

I got sent the wrong Halo set for my 03 V35 Coupe.

I have got a set of 06+ V35 Angel Eyes that I am going to either have to send back or just sell and buy a new set.

Anyone want to save some $$$ and get a unique look?

Hey Nate would you mind telling me where did you buy the halo's from. Did you buy it from ebay motors? I'm looking for a set of angel eyes fro my 01 v35 sedan. Any help would be much appreciated as a I'm a newbie. :)

Cheers

just remember you guys need professional installation. proper baking oven needed, silicon glue etc. as over time there will be leaks.

Yeah, dont buy these if you never held a screwdriver before..

But as for silicon glue, leaks, nope.

Well depends on installer, Im no mechanic, i just love moding stuff. My R6 i did a year ago has had no leaks no condensation ......

Put in oven for 85 degrees for 17mins and then take out and push tabs up and pull apart. Put back together, re heat and push together (just sit on couch n watch tv as ur holding it, when it cools its all sealed.) Im happy to help if needed, even those who buy elsewhere :P

If you need pics ill take them out and take some. they back in the box like they arrived.

IMG_3458.jpg

and

IMG_3419.jpg

Looks like this installed

http://umnitza.com/umnitza-predator-chromi...upe-p-1205.html

Edited by R6n350GT

Got my 03 ones coming in (i hope they are going to be right!!!) Will do a guide on how to install and wire these things.

they look amazing and turn heads, more head per $ than any other mod i think...

Any offers?

Free express post in the price plus any help i can give to install them.

They are not LED, They are CCFL type, which are much much brighter and last fast longer. They are fully inclosed not a naked ring...

And Nicko nice man, did u mount inside or outside the lens? What you tape into when wiring?

Took me bout 2 hours to get to the lens being open stage

Cheers

Cant wait for mine, but need to get these sold!!!

Who wants them???? Common dont be scared haha .

Ok got my new package of halos today.

They sent a 2003 G35 SEDAN pack, seriously dumb... car has been sat waiting for these and now i gotta wait some more.

Says on the box

BMW E36, E38, E39, E46, E39, E46 (A+B), E46 2D, E53(X5), G35 (must be sedan as they are too big for mine)

Side of biggest full ring is 145mm and the half ring 135mm

Will add photos.

$70 Delivered

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...