Jump to content
SAU Community

Recommended Posts

Go for the OEM bumper if:

1. you don't have time and money to get a bodykit you want.

2. you want a lip kit in the future which you do need OEM bumper instead of the whole bodykit.

I also think it's easier to deal with insurance if you just want to replace with same OEM bumper.

Go for the after-market if:

1. you got about $3k-$4k for genuine lip kit and $5k-$6k for genuine bodykit. Price defer on different brand.

2. you already found what you want and can get it done properly.

I think Chargespeed is one of the most expensive bodykit, followed by Kenstyle. There's also good lip kit out there if you want to keep your V35 looking simple.

Hope this helps. Good luck.

definantly did!

Excess for my insurance is like $1,700 so no use if its just the front bumper..

probably just look for OEM front bumper since i dont have 5k to spend on a bodykit lol :D

thanks heaps!

Welcome.

Sometimes, there's OEM stuffs from V35 for sale on SAU. Keep a look out for that as well, as you can save money in that way too.

is there any other place i can get it from ?

order it from overseas or anything like that ?

and rs73 can you show me a pic plz :D

With stock bumper, I wouldn't know. Probably have to be from Nissan.

I know a friend who changed his front bumper to aftermarket. I will pm again at the end of the week if he wants to sell it. But he is from Perth and is in pearl white.

is there any other place i can get it from ?

order it from overseas or anything like that ?

and rs73 can you show me a pic plz :D

I always come home too late to take pics... will have to do it Sunday the only 'free' day I've got, but

it will be like the picture below...

(The V35 front lip spoiler that attaches to the front bumper)

The gel coated is white.

4375504513_7a3dcf1487_o.jpg

Will take pic of the actual item this weekend.

I always come home too late to take pics... will have to do it Sunday the only 'free' day I've got, but

it will be like the picture below...

(The V35 front lip spoiler that attaches to the front bumper)

The gel coated is white.

4375504513_7a3dcf1487_o.jpg

Will take pic of the actual item this weekend.

rianto is that 370gt the factory bodykit?? I must admit the car is starting to grow on me...

chris35 had a greddy front bumper for sale not long too long ago...might want to pm him if he still has it

It's CRISP 35, Roy. :starwars: And he sold it already.

ripstah, that's a friend I said might still have a stock bumper. You can pm him if he wants to sell it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
×
×
  • Create New...