Jump to content
SAU Community

Recommended Posts

Go for the OEM bumper if:

1. you don't have time and money to get a bodykit you want.

2. you want a lip kit in the future which you do need OEM bumper instead of the whole bodykit.

I also think it's easier to deal with insurance if you just want to replace with same OEM bumper.

Go for the after-market if:

1. you got about $3k-$4k for genuine lip kit and $5k-$6k for genuine bodykit. Price defer on different brand.

2. you already found what you want and can get it done properly.

I think Chargespeed is one of the most expensive bodykit, followed by Kenstyle. There's also good lip kit out there if you want to keep your V35 looking simple.

Hope this helps. Good luck.

definantly did!

Excess for my insurance is like $1,700 so no use if its just the front bumper..

probably just look for OEM front bumper since i dont have 5k to spend on a bodykit lol :D

thanks heaps!

Welcome.

Sometimes, there's OEM stuffs from V35 for sale on SAU. Keep a look out for that as well, as you can save money in that way too.

is there any other place i can get it from ?

order it from overseas or anything like that ?

and rs73 can you show me a pic plz :D

With stock bumper, I wouldn't know. Probably have to be from Nissan.

I know a friend who changed his front bumper to aftermarket. I will pm again at the end of the week if he wants to sell it. But he is from Perth and is in pearl white.

is there any other place i can get it from ?

order it from overseas or anything like that ?

and rs73 can you show me a pic plz :D

I always come home too late to take pics... will have to do it Sunday the only 'free' day I've got, but

it will be like the picture below...

(The V35 front lip spoiler that attaches to the front bumper)

The gel coated is white.

4375504513_7a3dcf1487_o.jpg

Will take pic of the actual item this weekend.

I always come home too late to take pics... will have to do it Sunday the only 'free' day I've got, but

it will be like the picture below...

(The V35 front lip spoiler that attaches to the front bumper)

The gel coated is white.

4375504513_7a3dcf1487_o.jpg

Will take pic of the actual item this weekend.

rianto is that 370gt the factory bodykit?? I must admit the car is starting to grow on me...

chris35 had a greddy front bumper for sale not long too long ago...might want to pm him if he still has it

It's CRISP 35, Roy. :starwars: And he sold it already.

ripstah, that's a friend I said might still have a stock bumper. You can pm him if he wants to sell it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
×
×
  • Create New...