Jump to content
SAU Community

Another Diff question

esskimodo

By esskimodo,
in Drivetrain and transmission

 Share

Recommended Posts

esskimodo Apprentice

esskimodo

Posted
Posted

The diff center on my 96 GTSt has a sensor mounted in the front of it and on some of the other GTSts that I have looked at there isnt one...What tha?

Also, really dumb question alert....:) a LSD should spin both rear wheels when off the ground and one spun by hand (shouldnt they?) or it is a free wheeler?

oh yeah... are all turbo Skylines LSD

Link to comment
Share on other sites
deesh Collaborator

deesh

Posted
Posted

If you jack the back up, and spin one wheel:

a regular diff will make the other side spin opposite.

an LSD will spin them both in the same direction.

correct me if im wrong.

An easier way is to dump it and see what happens...

Link to comment
Share on other sites
Guest TTZ32

Guest TTZ32

Posted
Posted

The sensor could be for the ABS, if the skyline has a 3 channel ABS system(treats the rear wheels as one)

Nissans use a Viscous LSD, so with the wheels off the ground, if you turn one the other should turn also, but if someone holds the other wheel, you can still turn it, but it should be fairly hard

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Darrel
      Theoretical Power Numbers

      By Darrel · Posted

      @Butters I can't tell you why but the bigger HKS step 2 cams improved low and mid end immensely. Turbos started spooling about 1k RPM less than before and the idle/vacuum was rock solid, it was an absolute thrill to drive, 3rd gear pulls hit 180kmh where previously only managed 160. Conversely, the milder poncoms in there now have a funky idle making it harder to get off the line, drives poorly in lower revs, laggy and makes less power/torque throughout. Feels better after I swapped the EBC but unless I put it on the Dyno again, I can't say how much better.
    • stasis
      Stagea Suspension

      By stasis · Posted

      Hi Sydney kid   do you still selling spring and blistein shocks for Nissan 260rs? Air any suspension upgrades? Please advice     yudy
    • Butters
      Theoretical Power Numbers

      By Butters · Posted

      Cams are not needed at this power level, they will create lag. The cam gears are a good idea though.
    • Darrel
      Theoretical Power Numbers

      By Darrel · Posted

      @Murray_Calavera yeah, I guessed as much, cooler temps, more boost, less knock, more timing, hello power. Unfortunately not quite within reach ATM, could upgrade my whole fuel system to support but still wouldn't have E85 to run it 😂  Anyway, I changed cams again, 260/260 poncam B and everything else the same except an EBC upgrade. Now I must say I was quite disappointed with the result as it was like running stock cams (didn't try to dial them in as they're supposed to be optimum already) but after awhile I suspected my new EBC was underperforming not to mention difficult to use. I recently swapped back my old EBC and it drives much better now, boost comes on sooner, more stable, no spikes etc, feels all quicker and faster than with stock cams. Planning to fiddle with the cam gears and see what happens but maybe skip the Dyno as I intend to revert to the HKS cams cos they really made the car come alive; low and mid end was unbelievable and it just wanted to rev to the moon, finally knew what people were raving about, RB26 really loves revs. Anyway, Dyno 03 is quite disappointing, in Dyno 02 although peak power was less and trailed off at the top, the low and mid end improvement more than made up for it.
    • Murray_Calavera
      Theoretical Power Numbers

      By Murray_Calavera · Posted

      @Darrel It's so tempting to say e85 is borderline magic. It cools the intake charge, so if you're flirting with the edge of the turbos compressor map it helps dramatically cool down the hot air the turbos are pumping. It is very resistant to detonation so you can crank the timing, I don't really want to say you won't be knock limited anymore.... but you probably wont be knock limited anymore lol. I wouldn't be surprised if you made 20% more power swapping to e85 (provided you have the fuel system to support them, bigger injectors maybe bigger pump etc). 
×
×
  • Create New...