Jump to content
SAU Community

Recommended Posts

well i've got a HD daiken clutch put in the other day with a help of a mate of mine, it was all aligned right, bleed, and otherwise adjusted so the grab point is nice.- although seems though the grab point is just off the ground. although i'm still getting a slight "brrrrrrrr" noise like its still engaged when i'm not on the clutch and even more noticeable when its jsut sitting there in neutral. Someone told me i gotta shorten the rod going into the master clutch cylinder. is this right or wot? what should i do so adjust it correctly so its not constantly rubbing and wearing out??

thanks

ben

Link to comment
https://www.sau.com.au/forums/topic/33614-clutch-help/
Share on other sites

Hi skypy12, did you change the fork pivot? Most of the Daikins seem to be designed for the GTR pivot, which is 18 mm longer than a GTST pivot.

Looks like this

R33 GTR Pivot

If you don't, the clutch is too low to the floor and you aren't getting full release of the clutch plate. The other alternative is a longer shaft on the clutch slave cylinder.

Hope that helps

PS, this is what GTST pivot looks like when it breaks.

Link to comment
https://www.sau.com.au/forums/topic/33614-clutch-help/#findComment-674506
Share on other sites

no i didn't change the fork pivot, wasn't aware of having to change it at all.

are u sure about a longer shaft on the clutch slave cylinder??........cos i asked one of my mates today and he said somthin about shortening it........though he could be wrong.

and btw is the fork pivot located near the clutch pedal or where? i don't konw too much about them, but thanks for the help

is there any possiblity that just adjusting the pedal will elimate the problem..or only to a certain degree????

and will the clutch get screwed up if i drive with it like this for a few day, not saying i will but just incase its not fixed immediatly and i need to drive somewhere? noise isn't greatly loud but can just hear it slightly if ya listen for it.

Link to comment
https://www.sau.com.au/forums/topic/33614-clutch-help/#findComment-674581
Share on other sites

u maybe able to get more travel by adjusting the pedal u have to have a look , like sydney kid said a longer slave shaft will do the trick also , if u shorten it u want have clutch at all .

Link to comment
https://www.sau.com.au/forums/topic/33614-clutch-help/#findComment-675983
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...