Jump to content
SAU Community

Wtb A31cefiro Cross Member

A31Ceffy
 Share

Recommended Posts

Nic_A31 Grand Master

Nic_A31

Posted
Posted

Thought they were same as R32, but Sleeka Spares in Adelaide is wrecking 2 Cefiro's at the moment if you can't find one locally.

I might have a very very clean one (the one in my resto build) very soon as well.

A31Ceffy Apprentice

A31Ceffy

Posted
  • Author
Posted
Thought they were same as R32, but Sleeka Spares in Adelaide is wrecking 2 Cefiro's at the moment if you can't find one locally.

I might have a very very clean one (the one in my resto build) very soon as well.

i've been told that they sit the motor lower then r32 ones? not 100% sure on that tho...? can you let me know if you'll end up having one for sale? but i'll keep looking as well. cheers mate

Nic_A31 Grand Master

Nic_A31

Posted
Posted (edited)

Rumours are they are different, yes.

For some reason, a Cefiro crossmember is NEEDED to do an RB20DET swap into an S1x so there must be some differences.

How's $150 + Postage / $150 + I drop it off to transport company and they ship it to you, COD

?

http://i37.tinypic.com/2qvy1hc.jpg

EDIT: Freight will be f**k all, since trucks go Perth -> Back over East with alot less on board.

Edited by Nic_A31
A31Ceffy Apprentice

A31Ceffy

Posted
  • Author
Posted
Rumours are they are different, yes.

For some reason, a Cefiro crossmember is NEEDED to do an RB20DET swap into an S1x so there must be some differences.

How's $150 + Postage / $150 + I drop it off to transport company and they ship it to you, COD

?

http://i37.tinypic.com/2qvy1hc.jpg

EDIT: Freight will be f**k all, since trucks go Perth -> Back over East with alot less on board.

done mate! so with the COD i'll just pay the bloke that drops it off? whatevas easiest for u i can just give u money for the postage or whatevas. let me know mate

Cheers, Andrew

Nic_A31 Grand Master

Nic_A31

Posted
Posted

Yeah most mid sized freight companies allow payment on delivery.

I bought a FULL black interior (4x seats, 4x door cards, centre console, etc) from SA, the chick I bought it off simply took it to a depot, filled out con note and it was done, i paid for it over the phone when they called me to say it'd arrived at their depot (across the road from work) and picked it up later on.

IMO easiest way to freight big shit.

I went with Watsons Transport but ring around, get a quote and get back to me. I work in Perth's main industrial area, so most freight companies are nearby.

Give me a ring on 0431 598 320 when you've found your carrier, or if you need dimmensions/rough weight, etc.

A31Ceffy Apprentice

A31Ceffy

Posted
  • Author
Posted
Yeah most mid sized freight companies allow payment on delivery.

I bought a FULL black interior (4x seats, 4x door cards, centre console, etc) from SA, the chick I bought it off simply took it to a depot, filled out con note and it was done, i paid for it over the phone when they called me to say it'd arrived at their depot (across the road from work) and picked it up later on.

IMO easiest way to freight big shit.

I went with Watsons Transport but ring around, get a quote and get back to me. I work in Perth's main industrial area, so most freight companies are nearby.

Give me a ring on 0431 598 320 when you've found your carrier, or if you need dimmensions/rough weight, etc.

would u be able to just box it up and post it and i'll pay whateva that cost is? the cross member shouldnt be to big to post. only cause i work out in the sticks and being near a computer is a rare thing for me cause i dont stay at home when i'm working.

Nic_A31 Grand Master

Nic_A31

Posted
Posted

Too heavy for a box, could maybe tie it to a pallet here at work but it'd work out expensive. Is why I suggested small/medium freight companies.

TNT/Star Trak/Big companies will charge through the roof for it as it's unpackaged and shit, little companies won't give a shit, they'll chuck it on top of another pallet and charge f**k-all for it.

It's your call dude.

A31Ceffy Apprentice

A31Ceffy

Posted
  • Author
Posted (edited)
Too heavy for a box, could maybe tie it to a pallet here at work but it'd work out expensive. Is why I suggested small/medium freight companies.

TNT/Star Trak/Big companies will charge through the roof for it as it's unpackaged and shit, little companies won't give a shit, they'll chuck it on top of another pallet and charge f**k-all for it.

It's your call dude.

too heavy for a box? i've spent and received a full set of coil overs before using auspost which were in boxes and which are the same weight if not heavier then a cross member? the one i took out of my sil wasnt that heavy??

Edited by A31Ceffy
Nic_A31 Grand Master

Nic_A31

Posted
Posted

Crossmember is still longer, and a bit of an odd shape.

Aus post wont accept articles over 1 metre long.

Might have to pull out of this sale dude - probably going to sell both of my Cefiro's immediately, and need the front crossmember to keep the shell rolling. I'll keep you posted.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      An update regarding the registration with the DVLA I sent off the paperwork the day after I collected the car from the port, two weeks later it was all returned with a letter explaining they have rejected the application. This was because the cheque was £20 short for the road tax (I used a price list I found online). Nevermind it is what it is, it was sent back to them the following day with a new cheque. Fast forward another 2 weeks or so, I called them for an update to be told it had been rejected. Yesterday (16th September) I received the documents back along with another letter, this time it was because I didn't put an X in one box on the V750 (personalised number plate certificate), which declared that I had the rights to the personalised number plate. Why this wasn't mentioned in the first rejection letter, I don't know, but it could have saved this headache. The documents were sent back today, so fingers crossed third times a charm and it'll FINALLY be registered on the road just in time for the bad weather (woohoo!) To cheer myself up I lowered the front 25mm, was sick of seeing it sit like a monster truck. No idea how much clearance I'll have getting on and off the driveway, I'll worry about that when I can actually drive it
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • hoodedreeper
      Chris' Toyota Mark ii JZX110

      By hoodedreeper · Posted

      A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Shoota_77
      Shoota's R33 GT-R RB30/26

      By Shoota_77 · Posted

      Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
×
×
  • Create New...