Jump to content
SAU Community

Recommended Posts

Make/Model: Nissan Skyline HR31 GTS-X

Year: 1987

Kilometers: 132,000

Transmission type: Manual

Engine: RB20DET

Colour: Metallic Black

Modifications:

HKS 2510 Turbo, HKS Split Dump Pipe,

BOV, Malpassi Fuel Pressure Regulator with Gauge, RB25 Rocker Covers, GTR Intercooler, Pod filter,CD player, Gear knob, Autometer Boost Gauge, Pedders shocks/springs, 5stud rear hubs, 18" Stich rims, Modified GTR lip, NIStune Type 1 Liveboard, Adjustable Castor Rods, Bosch 040 fuel pump, AU Falcon Coilpacks, 3" Kakimoto Exhaust.

Tuned to 214.7kw @ 14psi, By Declan at Garage 7.

Roadworthy Certificate: N/A

Registered: Yes

Accident History: Front bumper, filler panel, grille

Asking Price: $11,500

Location: Flagstaff Hill

Contact Details: Jake 0430 540 782

Other Comments:

Purchased this car about 4 months ago, with no real intentions of doing much to it. I am the second owner is Australia, and was imported of 2007, where the previous owner travelled less than 5000 kilometres in 3 years! I bought it with 126,000kms and have added 6000kms. I have spent about $2000 so far on it, getting it tuned and running the way i want it to be.

This car handles great, makes great power for a Rb20DET, and is a solid car all round. These cars are getting harder to find, and with a custom paint job, straight panels and clean interior, you certainly are on to a winner. Has seen one track day, at Skyline Nationals 2010.

Feel free to look at the build thread, and don't hesitate to ask questions.

Build Thread - http://motamota.r31skylineclub.com/index.php?topic=141177.0

skynats201010.jpg

2010skynats01.jpg

skynats201003.jpg

Link to comment
https://www.sau.com.au/forums/topic/337669-sa-1987-hr31-gts-x/
Share on other sites

Thanks for the compliment mate!

http://www.skylinesaustralia.com/forums/Ja...ts-t320108.html

That's the SAU build thread, same outcome, less chit chat from the 31 club!

  • 3 weeks later...

Anyone?

Re-sprayed 8 months ago, brand new 32 GTR Intercooler 2 months old, not a scratch in sight.. great power from a rb20.. be different from everybody else!!

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
    • ECUtalk pages don't mention they support the ABS computer (consult port has more than one CAN), so you might just need a different scan tool. But, I would expect ABS is a different light to the brake warning/handbrake light, do you see an ABS light come on for a few seconds when you turn the key from ACC to IGN? But since you said: I'd have a look at the ABS sensors in the rear hubs to make sure they are not damaged, disconnected etc.
×
×
  • Create New...