Jump to content
SAU Community

6boost Manifold | Garrett T04z | Synapse Engineering 50mm Wastegate

murrayis
 Share

Recommended Posts

murrayis Mentor

murrayis

Posted
Posted

Hi All,

I have decided to part with my large Highmount setup for a RB25DET, Up for sale are the following items;

1 x Highmount 6Boost T4 Split Pulse Manifold

1 x Garrett T04Z .86 Rear

1 x Synapse Engineering 50mm Wastegate

All Items are in good condition with minimal shaft play on the turbo. I'm looking for $2500ono for the lot, not really interested is selling everything separately at this time.

Best contact is PM or email [email protected]

Cheers

Cameron

  • 3 weeks later...
leekim Rookie

leekim

Posted
Posted
Ok guys I need this stuff gone, & I'll through in the front pipe as well if you pick it up $2000

hey let me kno if your willing to sell the manifold sep send price and pic's to [email protected]

  • 3 weeks later...
bubbabooga Rising Star

bubbabooga

Posted
Posted

hey bud..

wondering how much you would let the 6 boost mani go for seperatlly?

is it twin scroll also?

cheers

  • 2 weeks later...
murrayis Mentor

murrayis

Posted
  • Author
Posted

Hi,

Turbo has been sold, Still have the Manifold and Gate looking for $900 for the pair or $650 for the mani and $350 for the gate.

Cheers

Cameron

  • 3 weeks later...
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...