Jump to content
SAU Community

Fs: R33 Goodies. Stock & Moded

GTScotT
 Share

Recommended Posts

GTScotT Grand Master

GTScotT

Posted
Posted

Hey guys,

A clean up of my last thread. Turbo is sold! So here goes.

* RB25DET - 127xxxKM, cyl 6 slightly less compression than the other 5 on 180. Manifolds included, no injectors or rail. $1000 (have interest already)

* R33 RB25DET 5 Speed Gearbox conversion - 127xxxKM, runs well, car is mostly stock and has not had much abuse. Stock clutch, pedal, lines, etc ra ra ra, all included. $1200 FIRM.

* 700cc Injectors - High flows, just done, flow matched work perfectly. In factory rail with reg $450

* Z32 AFM with plug - Near new bosch item purchased from justjap not long ago $200

* Splitfire S1 coilpacks - $400

* Stock coilpacks in good condition - $100

* Stock R33 crossover pipe with BOV - $80

* Stock R33 intercooler - $80

* R33 alternator $80

* BRAND NEW JJR Stealth FMIC. Fitted and driven back in the garage before my turbo sold. I paid $550 from Just Jap 2 weeks ago. Yours for $480 Firm.

* R33 Engine wiring harness, coilpack and injector harness included. VGC. Unmolested - $150

* HKS mushroom pod filter. Suits RB and Z32 AFMs, bolts into place. - $100

* R33 stock shocks and springs - $100

* R34 stock shocks only - $50

* RSR Ti2000 springs, suit R33/34 (I think R32 also) - $100

More to come as I strip the engine bay. Postage on smaller items, pickup only on larger.

Bankstown area Sydney.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/338255-fs-r33-goodies-stock-moded/
Share on other sites
Bubbafaguchi Enthusiast

Bubbafaguchi

Posted
Posted

* 700cc Injectors - High flows, just done, flow matched work perfectly. In factory rail with reg $450

* Z32 AFM with plug - Near new bosch item purchased from justjap not long ago $200

Are you neg on the above items? and would you do a better deal if purchased together?

Cheers Jason

GTScotT Grand Master

GTScotT

Posted
  • Author
Posted

Injectors and AFM SOLD

Added:

* R32 ecu socketed and remapped for 3037 (3076R), 700cc, Z32 - $150

* R33 RB25DET factory ecu - $100

* Green label RB afm - $100

GTScotT Grand Master

GTScotT

Posted
  • Author
Posted

Gearbox is now $1200 with fork/slave/clutch/flywheel

Pedal box and master will be kept for my conversion.

This price is generous as it is, no more low balls.

Cheers

  • 2 weeks later...
  • 1 month later...
  • 5 weeks later...
GTScotT Grand Master

GTScotT

Posted
  • Author
Posted

Hey guys,

Very sorry for ignoring my thread for so long, possibly best to PM in future.

Geabox is now sold, clutch and flywheel assy still available.

Long motor still available.

Stock shocks and springs in regular old condition, pics available - no obvious leaks or anything and they drove fine.

RSR springs were actually for an R34 and dropped the car to a good height. I have a photo of the front of my car if still interested (with the RSR's fitted)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Yes then it will turn on but I want the car features to work  
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • GTSBoy
      Nissan fuga 450gt android screen

      By GTSBoy · Posted

      What about if you just give it direct 12v and earth?
×
×
  • Create New...