Jump to content
SAU Community

Recommended Posts

Ok guy's big part sale need these parts gone... asap as i want 2 make room for my s15 project.

1. s15 Dmax rear fenders 50mm $375

post-61803-12855746343607_thumb.jpg

2. z32 Airflow meter and plug $250

post-61803-12855709172939_thumb.jpg

3. Coustom surge tank and bosch 044 fuel pump with lines $450

post-61803-12855716408617_thumb.jpg

4. Greddy turbo timer $100

post-61803-12855724756352_thumb.jpg

5. Bride seat with r32 gtst seat rails $550

post-61803-12855741880985_thumb.jpg

6. Haltech platinum 1000 and patch loom for s15 $1800

post-61803-1285573672073_thumb.jpg

7. 53mm Koyo radiator $600

8. s14 re-mapped computer $250

9. Standard s15 computer $250

10. Motor, turbo, gearbox setup for sale $14,500

*Arias 40 thou over size forged pistons

*Arias Chrome moly rings

*Scat H-beam rods

*ACL race bearings (main and rods)

*ACL race bearings (thrust)

*Full genuine Nissan gasket set

*HKS multy layer metal head gasket 1.6mm

*HKS heavy duty valve springs

*HKS Camshafts step 3, 264 EX and 272 IN

*HKS adjustable cam gear inlet and exhaust

*Tomei solid lifters

*Tomei rocker stoppers

*Brand new Nissan rocker arms

*ARP mains

*ARP headstuds

*Trust TD06-25G 10cm turbo with polished front comp cover, fully rebuilt and balanced by ATS

*Custom high mount steam pipe manifold

*HKS external gate 48mm with screamer pipe

*Sard 850cc injectors and plugs

*Greddy inlet plenum

*Xtreme custom made GTR clutch to suit SR20 1600kgs solid centre with Moly flywheel

*RB25DET gearbox with custom bellhousing

*Head was faced, valve stems seals, acid dipped

*Block has been bored, faced, tunnel bored, crack tested, honed, acid dipped, crankshaft crack tested, timing chain cover machined to suit both all done by Chris Milton Engine Developments.

post-61803-12855752762786_thumb.jpg

11. r32 gtst rolling shell with loads of suspension parts! $6,000

Suspension:

Ohlins Coilovers

Adj Castor Rods

Adj Upper Arms

Adj Whiteline swaybars

R33 Lower control arms

Offset rack spacers

NP Wonder knuckles

Solid Alloy steering Spacer

Rear Adj Camber arms

Solid mounted rear cradle

Hicas Lock bar installed and all hicas lines and pumps removed from the car

044 intank pump

Interior:

Hydraulic handbrake

5 point safety harness

Fire extinguisher

Trust boost gauge

Nismo 260k dash cluster

Body:

Monkey warehouse Uras body Kit

Standard r32 gtst rims not the 1's in the pic

post-61803-12855754056925_thumb.jpg

12. Nissan 200sx s14 s1 $14,500

*Twin thermo fans

*Exedy heavy duty clutch and fly wheel

*Blitz pod filter

*s15 motor (110,000 kms)

*s15 6 speed

*s15 suspension

*s15 rear end diff, hubs axles ect.

Interior:

*Pioneer head unit

*6 inch pioneer speakers

*Velo race seat

*Fire extinguisher

Exterior:

*Full JDM Aero Kit

*Amazon Green(Standard)

*Rolled Front Guards

*Pumped/Lipped Rear Guards

*Removed Standard Wing

*Origin Front Clear Indicators

*Commo Spec Clear Guard Indicators

*Work Emotion XC8sF: 18x9.5 +20 R: 19x10 +20

post-61803-12855778460942_thumb.jpg

If any1 wants 2 know anything just ask.

can also get more pics if needed, cheers dave

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/
Share on other sites

  • 1 month later...

Price drop want this stuff gone open 2 offers.

Ok guy's big part sale need these parts gone... asap as i want 2 make room for my s15 project.

1. s15 Dmax rear fenders 50mm $375 now $325

post-61803-12855746343607_thumb.jpg

2. z32 Airflow meter and plug $250 now $220

post-61803-12855709172939_thumb.jpg

3. Coustom surge tank and bosch 044 fuel pump with lines $450 now $375

post-61803-12855716408617_thumb.jpg

4. Greddy turbo timer $100 now $80

post-61803-12855724756352_thumb.jpg

5. Bride seat with r32 gtst seat rails $550 now $450

post-61803-12855741880985_thumb.jpg

6. Haltech platinum 1000 and patch loom for s15 $1800 now $1650

post-61803-1285573672073_thumb.jpg

7. 53mm Koyo radiator $600 now $500

8. s14 re-mapped computer $250 now $220

9. Standard s15 computer $250 now $220

10. Motor, turbo, gearbox setup for sale $14,500 now $13,500

*Arias 40 thou over size forged pistons

*Arias Chrome moly rings

*Scat H-beam rods

*ACL race bearings (main and rods)

*ACL race bearings (thrust)

*Full genuine Nissan gasket set

*HKS multy layer metal head gasket 1.6mm

*HKS heavy duty valve springs

*HKS Camshafts step 3, 264 EX and 272 IN

*HKS adjustable cam gear inlet and exhaust

*Tomei solid lifters

*Tomei rocker stoppers

*Brand new Nissan rocker arms

*ARP mains

*ARP headstuds

*Trust TD06-25G 10cm turbo with polished front comp cover, fully rebuilt and balanced by ATS

*Custom high mount steam pipe manifold

*HKS external gate 48mm with screamer pipe

*Sard 850cc injectors and plugs

*Greddy inlet plenum

*Xtreme custom made GTR clutch to suit SR20 1600kgs solid centre with Moly flywheel

*RB25DET gearbox with custom bellhousing

*Head was faced, valve stems seals, acid dipped

*Block has been bored, faced, tunnel bored, crack tested, honed, acid dipped, crankshaft crack tested, timing chain cover machined to suit both all done by Chris Milton Engine Developments.

post-61803-12855752762786_thumb.jpg

11. r32 gtst rolling shell with loads of suspension parts! $6,000 now $4,500

Suspension:

Ohlins Coilovers

Adj Castor Rods

Adj Upper Arms

Adj Whiteline swaybars

R33 Lower control arms

Offset rack spacers

NP Wonder knuckles

Solid Alloy steering Spacer

Rear Adj Camber arms

Solid mounted rear cradle

Hicas Lock bar installed and all hicas lines and pumps removed from the car

044 intank pump

Interior:

Hydraulic handbrake

5 point safety harness

Fire extinguisher

Trust boost gauge

Nismo 260k dash cluster

Body:

Monkey warehouse Uras body Kit

Standard r32 gtst rims not the 1's in the pic

post-61803-12855754056925_thumb.jpg

12. Nissan 200sx s14 s1 $14,500 now 13,000

*Twin thermo fans

*Exedy heavy duty clutch and fly wheel

*Blitz pod filter

*s15 motor (110,000 kms)

*s15 6 speed

*s15 suspension

*s15 rear end diff, hubs axles ect.

Interior:

*Pioneer head unit

*6 inch pioneer speakers

*Velo race seat

*Fire extinguisher

Exterior:

*Full JDM Aero Kit

*Amazon Green(Standard)

*Rolled Front Guards

*Pumped/Lipped Rear Guards

*Removed Standard Wing

*Origin Front Clear Indicators

*Commo Spec Clear Guard Indicators

*r33 gtr rims not the 1 in the pic!

post-61803-12855778460942_thumb.jpg

If any1 wants 2 know anything just ask.

can also get more pics if needed, cheers dave

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/#findComment-5524291
Share on other sites

What did you do with the running gear out of the r32 gtst?

Previous owner had "sold" that car to me a couple months back but reneged on the deal as obviously you must have offered more money.

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/#findComment-5524306
Share on other sites

What did you do with the running gear out of the r32 gtst?

Previous owner had "sold" that car to me a couple months back but reneged on the deal as obviously you must have offered more money.

putting it in my project car. did you just want the motor gearbox ect.

Link to comment
https://www.sau.com.au/forums/topic/338456-big-parts-sell/#findComment-5524324
Share on other sites

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
×
×
  • Create New...