6 Bolt S14 Lsd Centre Going Into R32 Gts-t, What Needs To Be Modified?

[Rolls]

Looking at a second hand s14 nismo 2way lsd centre with 6bolt inner shaft, he also has the drive shafts if needed.

What is needed to put this into my R32 gts-t, can I just simply swap the centre and everything will work? Or will I need to use the 6 bolt drive shafts and modify other things?

Thanks

[bubba]

Not sure with the S14 setup but my Nismo centre for the 32gtst came with new shafts, from the factory the shafts are one long one short, the Nismo diff came with two new factory short shafts.

If you can go look at the diff, try take a short 32gtst shaft with you and see if the splines are the same, if they are then just run two short 32gtst shafts, if not maybe try find suitable shafts. Depends how much it is..

You can mix'n'match a lot of Nissan stuff, I just replaced the standard open centre in my Stagea with the old (shimmed up) LSD out of the 32. Had to use 32gtst shafts (both are 5x1 but the open centre was smaller diameter) and transfer the ABS teeth from the Stag shafts.

In my 32gtst, I put the 32gtst Nismo 2-way centre in to an S13 housing as I wanted the 3.9:1 gearing.