Jump to content
SAU Community

Recommended Posts

hey guys

im thinking of selling my car, dont really drive it often just sits in the garage.

i bought the car in 2008 of a old lady was pretty much standard sr20 so ive built this car from ground up, the conversion is mod plated so it is legal. motor was built at gavin woods autotech on the gold coast, motor is still fresh.

i love this thing but i just dont drive it enough.

the car won best late model award at stadium drift

featured in fast fours magazine this year

also featured at gold coast autosalon

r33 1997 gtr engine

Greddy 264deg easy cams

Greddy valve springs

hks cam gears

gates timing belt

Trust Metal Head Gasket

trust clear cam gear cover

Tomei oil restrictor

Arias Pistons

Eagle rods

Nismo bearings

billet oil pump

N1 Water Pump

Head fully recon'd and lifters set for the cams

Fully balanced

Block and crank crack tested

Block acid dipped, decked etc

Crank linished

garrett gt3582r

greddy high mount manifold

greddy external wastgate type r

greddy y intake pipe

hks pod filters

greddy Fuel Rail

hks fuel reg

Sard 700cc injectors

Tomei Sump Baffles

apexi power fc d-jetro

superspark coilpacks

custom rwd sump

4 inch dump

trust stainless 80mm cat back exhaust

cooling pro 600x300x100 intercooler

custom 3'' cooler piping

saber alloy radiator

twin 12 inch thermos

alloy polished overflow bottle

turbosmart e boost 2 (40psi)

turbosmart supersonic bov

whiteline sway bars front and back

whiteline strut brace

rear adjustable camber arms

rear adjustable toe arms

racing logic coilovers

rb25det gearbox

exedy button clutch

exedy lightweight flywheel

custom tailshaft

walbro fuel pump

saber guages oil press, oil temp, water temp and boost mounted in the air con vents

battery relocated to the boot

r34 gtr v spec front seats

retrimmed door cards in suede

smoked tailights

nismo smoked side indicators

blits fibreglass adr approved vent bonnet

vertex front bar

vertex rear bar

vertex side skirts

shaved boot lock

flared rear guards

resprayed in r34 gtr nur gold (millennium jade) with gold flake including engine bay

volk gts gunmetal grey 18x9+27 18x10+23

made 408rwhp on 15psi and 450rwhp on 18psi

serious offers only i will only sell it at the right price otherwise im keeping it.

$35000

brad 0421511710 or pm

post-50709-1285912177_thumb.jpg

post-50709-1285912193_thumb.jpg

post-50709-1285912334_thumb.jpg

post-50709-1285912350_thumb.jpg

post-50709-1285912366_thumb.jpg

post-50709-1285912488_thumb.jpg

post-50709-1285912512_thumb.jpg

post-50709-1285912560_thumb.jpg

post-50709-1285912643_thumb.jpg

post-50709-1285912512_thumb.jpg

post-50709-1285912366_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/338834-e0i-rb26-powered-s15-2001-rbs15/
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...