Jump to content
SAU Community

Recommended Posts

rb25det power fc, 6 months old $1800

z32 air flow meter (almost new 3000kms) $200

gcg stainless steel high mount manifold t3 flange $500

garret gt3540r .63 rear houseing almost new with only 3000km's on it $1800

turbosmart 45 pro gate $500

custum dump/front pipe $250

would rather sell as package is making over 400rwhp on 14psi safe tune

................................................................................

.............................................

rb20det stock exhaust manifold and turbo (good working condition

with no shaft play) $300

stock rb20det plenum with tb $100

rb20det motor was running but not healthy (needs water pump) $200

3" catback exhaust with cat $100

stock r32 gst seats good codition $100

s15 bride door trims $400

extra pics to come.

post-47384-1286090266_thumb.jpg

post-47384-1286090503_thumb.jpg

post-47384-1286091089_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/339043-rb25-and-rb20-parts/
Share on other sites

Where you located? Keen on motor

sorry

located in wingham nsw 2429

just letting you know, the motor is bare

5ky whats you offer on just the commander

Edited by stewari
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...