Jump to content
SAU Community

Recommended Posts

hey peeeps

For sumreason in the last month my speakers in my R32 have become distorted its really anoying and i dont wanna wanna spend money to get it fixed when i could do it myself if sum1 could help that would be great??

cheers

at all volume levels ? or random?

what brand of speaker?

how much power ? run off the deck or amp?

do they do it cold and hot after running a little while?

fronts or rears?

any music or talk radio as well ?

if you can record a few seconds of it on a phone or ? and post it up it might help troubleshoot a lot..as you can see we need more info before pointing you in the right direction.

cheers

at all volume levels ? or random?

what brand of speaker?

how much power ? run off the deck or amp?

do they do it cold and hot after running a little while

fronts or rears?

any music or talk radio as well ?

if you can record a few seconds of it on a phone or ? and post it up it might help troubleshoot a lot..as you can see we need more info before pointing you in the right direction.

cheers

hey mate it happens 2 CDs And radio it's all the speakers .they are stock skyline speakers and sumtimes a loose volumein the back but il have slight sound in the front. I'f I hit a bump in the road it sumtimes fixes but not for long ? Il try record it if this dosnt help.

Cheers mate

hey mate it happens 2 CDs And radio it's all the speakers .they are stock skyline speakers and sumtimes a loose volumein the back but il have slight sound in the front. I'f I hit a bump in the road it sumtimes fixes but not for long ? Il try record it if this dosnt help.

Cheers mate

is it distortion(music that sounds funny/muddy/popping)

or static electricity sounds/whine

type of deck ? stock or after market ?

if it has a old type rotary volume knob it can be a problem if the car was smoked in or driven in lots of dust

amps ?

sound more like a bad wiring/circuit board if a bump in the road fixes it

have you faded the speaker to each one separate and tested to be sure its not just one speaker your hearing ?

more info please

Hey

ok I have a pioneer deck Stock speakers. ATM I only have sound at the front. while I'm driving the back spearkers make disorted noise like crackling.I think there's a loose conection sumwhere. It's disorted when u turn the volume up too ??

Hey

ok I have a pioneer deck Stock speakers. ATM I only have sound at the front. while I'm driving the back spearkers make disorted noise like crackling.I think there's a loose conection sumwhere. It's disorted when u turn the volume up too ??

first guess - look at the speakers in the boot up close, baby bolts hitting the wires, loose speaker wires hitting the metal of the car from rear speakers area(aftermarket decks don't like using the car body for the ground on the speaker wires too many OHMS..lol), tinsel leads that go from the speaker connection to the speaker coil touching metal , re-bend carefully.

or simply the factory paper cone speakers are cracked on the cone from being old and in the UV sun all day, if they make a rough sound the voice coils might be fried, you can tell if you carefully push on the cone with even force to move it in and out, if you feel grinding, dirty feel its most likely dead. (OHM meter can tell you as well)

cracked cones, ditch them for some new ones, you don't need to spend a mint to improve over factory..lol

'

next option would be the deck wiring is stuffed , most likely a "tape the wire together" job that has come loose and now shorts out random ?

Edited by sapphiregraphics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...