Jump to content
SAU Community

Recommended Posts

Item Summary: s2 skyline parts near complete unwanted project

Location: QLD: Brisbane

Condition: Used

Reason for Selling: not needed

Asking Price: 1

Delivery Methods: PickUp

Contact Info: 0433902259

Extra Information:

I have a near complete s2 r33 i was planning on useing as a track car it is not running and uncomplied but change of plans im sticking with my current car so i need this one gone.I have most parts but will list the major items but if there anything else you need let me no id say ill have it..

Body wise.......

s2 head lights $180 pair have fade need a clean

s2 bonnet needs minor repair $150

s2 guards good condition $300 pair

s2 frontbar reo $100 looks new

or take whole front $550 please note there is no front bar included as im keeping it

s2 interior f&r seats with door cards drivers seat has wear all else good $350

s2 dash soround and gearboot cover (nicer finish than s1) $85 including switches etc

s2 boot spoiler $100

boot $80

doors including glass etc $80each

s2 side skirts need minor repair $100

s2 rear bar and pods need minor repairs $150

mechanical parts....

bottom end done a piston $200

throttlebody with tps $50

intake plennum $50

turbo manifold set up SOLD

coilpacks $100 the set

afm $50

cas $50

diff $150

complete set of callipers and rotors $400

front mount kit SOLD

and all else please contact me

also have a complete manual conversion kit $1350 make an offer

if havnt listed something you need just give me a call i will probaly have it.all parts must go so make an offer.

--------------------

do it once do it right

Link to comment
https://www.sau.com.au/forums/topic/340932-wrecking-33-s2/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...