Jump to content
SAU Community

Recommended Posts

Makes no difference man. Prams are fkn big. Shopping is huge, a trip to the airport with family is nothing like youve ever known.

Really? Geez..I better check on that before I actually buy the car for that purpose. Thanks. :)

I am in the same boat as you, Dames. Personally, I love my V35 coupe but will be needing more practical car in 3-4 years time for expanding family, plus abit of turbo power for driving pleasure. :P

Forester XT perhaps? Not bad on fuel!

...and join ozfoz.com

unless prams have grown substantially in the last dozen years, they will fit nicely in the back of a WRX hatch. I had an MY02 sedan when my kids were 4yrs and 18 months, before that I had a Magna and R32 GTSt (which my wife took interstate with the kids).

Make sure there's enough room in the car to have the baby seat facing backwards for the first few months (the R32 needed the passengers seat folded forwards to fit) but the kids grow out of that very quickly.

There's enough room to fit even the widest pram in the back of a WRX hatch with the back seats up. I don't know what sort of prams are being talked about here, but we used a convertible pram / stroller that folded away to almost nothing.

You DO NOT need a station wagon if you have little kids. If I didn't have to tow a rally car, we would have 2 small cars, the WRX and probably a diesel golf or even sh!tbox hyundai I30

Forester XT perhaps? Not bad on fuel!

...and join ozfoz.com

New Forester's look tuff, i saw a black one cruise past at the lights and at first glance thought it was some new Lexus or other higher classed car!

Edited by TUFF_350
No worries, have a look at a Stag or GT LIberty.

Im a stay at home Dad with a 6 and 3yo, I still need the wagon now.

Thanks mate. I do like 2001+ Stagea but I am trying not to get anymore imports as Mrs wants good resale car.

Edited by Victor.T
unless prams have grown substantially in the last dozen years, they will fit nicely in the back of a WRX hatch. I had an MY02 sedan when my kids were 4yrs and 18 months, before that I had a Magna and R32 GTSt (which my wife took interstate with the kids).

Make sure there's enough room in the car to have the baby seat facing backwards for the first few months (the R32 needed the passengers seat folded forwards to fit) but the kids grow out of that very quickly.

There's enough room to fit even the widest pram in the back of a WRX hatch with the back seats up. I don't know what sort of prams are being talked about here, but we used a convertible pram / stroller that folded away to almost nothing.

You DO NOT need a station wagon if you have little kids. If I didn't have to tow a rally car, we would have 2 small cars, the WRX and probably a diesel golf or even sh!tbox hyundai I30

Really depends if you want the missus dragging a 12kg pram over your rear bar paintwork I guess.

Ease of access is what its all about.

12kg? Fark me what are they making them out of these days? Our pram would have been flat out weighing 5kg fully dressed. As I said, once folded up it was a breeze to lift in and out of the car. Bloody easy to use, too.

Besides, the hatch has the same access as a station wagon, so I can't see that being a problem.

The crap you're likely to drag around int he back of a station wagon is more likely to damage your paintwork / interior than the stuff you normally put in a hatch or sedan. When you have the space, you end up using it eventually.

If you want ease of access, the simplest way to put a baby into a baby seat is a decent sized 2 door car where you can step into the back, and sit down next to the baby seat. Much easier than leaning into a car to fiddle with belts etc.

Been there done that. Just glad my kids can do most things for themselves now.

I bought my wife a mint r33 4 door auto, airbag version (rare for a 93), auto front spoiler. Beautiful car, the complier said it was the cleanest he'd ever seen. I had to sell it as the pram (fark knows when you had kids warps) was too difficult to load/unload, car was getting scratched etc. So I gave her my RS4. She loved it, flat loading area, pram, baby bag and the fortnights shopping in without a problem. She was most happy, so was I, I got an Autech.

So Victor, its up to you. We didnt find sedans, and definately not a hact suitable to our needs. The wagon was the answer for us.

the boot on any sedan smaller than a falcon/commodore is small.

as for hatches, depends on the car as to how big the boot is. the missus SSS has a small boot compared to my mothers corolla. but both were smaller than a commodore or falcon boot. have to go to a wagon to get a bigger boot than them.

I bought my wife a mint r33 4 door auto, airbag version (rare for a 93), auto front spoiler. Beautiful car, the complier said it was the cleanest he'd ever seen. I had to sell it as the pram (fark knows when you had kids warps) was too difficult to load/unload, car was getting scratched etc. So I gave her my RS4. She loved it, flat loading area, pram, baby bag and the fortnights shopping in without a problem. She was most happy, so was I, I got an Autech.

So Victor, its up to you. We didnt find sedans, and definately not a hact suitable to our needs. The wagon was the answer for us.

Thanks mate. I might just get a 4WD in that case first. :P

I found these information on Subaru website.

(2010 Subaru Impreza WRX STI - Hatch)

Cargo volume - rear seat up/down (litres) 301/742

(2010 Subaru Impreza WRX STI - Sedan)

Cargo volume - rear seat up/down (litres) 420/-

Is it just me or the sedan cargo really is bigger compare to hatch with rear seats up? Weird. :thumbsup:

Edited by Victor.T

Wow - that might be the ugliest car Subaru have made to date...

It's all been downhill for them after the GC8 model.

Did you hear the great news - they now make the STI in Auto!!! <<<< Give me a break...

If i were to get a Subaru I'd drive it off a cliff. No offence to anyone - just my opinion.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
    • In my head it does make sense to be a fuel problem since that is what I touched when cleaning the system. When I was testing with the fuel pressure gauge, the pressure was constantly 2.5 bar with the FPR vacuum removed. When stalling, the pressure was going up to 3.0 bar (which is how it should be on ignition).
×
×
  • Create New...