Jump to content
SAU Community

R33 Gtr Fuel Pump In My R32 Gts-4

OMGGTR

By OMGGTR,
in Engines & Forced Induction

 Share

Recommended Posts

OMGGTR Mentor

OMGGTR

Posted
Posted

Hi guys, used search b4 i decided to make a new thread, but dident quite find what i was after so here it goes!

today i went to Dr drifts dyno day..

jumped on the dyno and initial run i was told the cars running way to lean and its to dangerous to run so i waisted 50 bux for nothing lol

he told me fuel pumps f*ked (standard rb20 one) so i went on home and fitted a r33 gtr fuel pump took me about 15 mins to do it and it all fitted perfect with some slight modifications.

car runs awesome... and all went well... but ITS WAY TO LOUD! like... people driving next to me can hear it....

now i know its not vibration its just the pump sound.... could this be that voltage problem ?

what do i do ?

Link to comment
https://www.sau.com.au/forums/topic/342554-r33-gtr-fuel-pump-in-my-r32-gts-4/
Share on other sites
R31Nismoid Grand Master

R31Nismoid

Posted
Posted

Mounted it incorrectly, only reason really.

The pump shouldn't be "that" noisy at all.

Although given you've made no mention of any wiring changes (which are required), then that's also a problem.

OMGGTR Mentor

OMGGTR

Posted
  • Author
Posted (edited)

hmmmm ill just have to pull it out and take another look... ill get back to u, hope its not to do with voltage.. so cbf with electronics i hate it

Wiring changes? theres a positive and negative .... did i miss something?

Edited by v8tzr
OMGGTR Mentor

OMGGTR

Posted
  • Author
Posted

bah nismoid can u link me to a DIY if there is one? or shed some light on what needs to be done... some 1 was telling me to hook up a relay n straight to the battery? something about r32 voltage drop on idle....

paulr33 Grand Master

paulr33

Posted
Posted

i did a GTR pump in my r33 and its basically silent if mounted properly

you can hear an ever so slightly pump whirr when you tap the throttle but thats it

certainly you wouldnt be able to hear it outside the car

id say its hitting metal or something

when you mounted it, did you slide it back into the same spot, using the ceiling slide mount thingy?

OMGGTR Mentor

OMGGTR

Posted
  • Author
Posted

yeh man... look i may get rid of the sound... but shit i duno whats happening if i rev up now 3k upwards the car feel like its building up a lot of pressure and the revs go down as i accelerate... and i loose a lot of power ???? i hope i dident do damage... so i been just baby shifting all day till i get it out...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...