Jump to content
SAU Community

All C210 Owners?


Ghostrider
 Share

Recommended Posts

Red one looks like a C10 one, cause of the mounting at the back

and black one is stick on which wasn't how they were.

But yes they are of C210 size and shape, same as C110

Edited by Socrates
Link to comment
Share on other sites

I have found i have made some mistakes.

The blue is pretty dark, took it as black.

Both of are of C110/210 size and shape.

Badge on left,

no idea what it's from, aftermarket

Right, C110

genuine.

Note rear quarter panel on JDM C210:

post-67860-1288712975_thumb.jpg

My car before new badges:

post-67860-1288713461_thumb.jpg

Link to comment
Share on other sites

Also, with C210 onwards Blue = Non turbo, Red = Turbo

Cost me $174 for 2x "Skyline" Badges and 2x blue GT badges from yahoo japan through jesse streeter., nissan wanted $300.

Edited by Socrates
Link to comment
Share on other sites

Also, with C210 onwards Blue = Non turbo, Red = Turbo

Cost me $174 for 2x "Skyline" Badges and 2x blue GT badges from yahoo japan through jesse streeter., nissan wanted $300.

C210,s never came out with turbos, c211,s did in japan April 1980, those badges fit

on the rear quarter panel.

Link to comment
Share on other sites

C210,s never came out with turbos, c211,s did in japan April 1980, those badges fit

on the rear quarter panel.

technically yes but when people say C210 they mean the whole model not just series 1

Link to comment
Share on other sites

technically yes but when people say C210 they mean the whole model not just series 1

Rightly so, did you know there is a c111 model from the c110, it has fuel injection and a 2 litre 6

also it has a rear wiper for a 4 door sedan, and 4 wheel disc drakes,

Also some of the c210/c211 came out with leather interior,

in australia a good friend of mine owed a wrecker had a 4 cylinder c210 sedan yes"" sedan"" not wagon

with leaf springs. it had the 1.8 motor the same as a 180b.

Cheers

Link to comment
Share on other sites

Rightly so, did you know there is a c111 model from the c110, it has fuel injection and a 2 litre 6

also it has a rear wiper for a 4 door sedan, and 4 wheel disc drakes,

Also some of the c210/c211 came out with leather interior,

in australia a good friend of mine owed a wrecker had a 4 cylinder c210 sedan yes"" sedan"" not wagon

with leaf springs. it had the 1.8 motor the same as a 180b.

Cheers

didn't know about C111 having fuel injection.

did series 1 c210's have fuel injection JDM?

leaf springs on a 1800TI doesn't sound right, unless they had non independent suspension for the lower models.

Link to comment
Share on other sites

Rightly so, did you know there is a c111 model from the c110, it has fuel injection and a 2 litre 6

also it has a rear wiper for a 4 door sedan, and 4 wheel disc drakes,

Also some of the c210/c211 came out with leather interior,

in australia a good friend of mine owed a wrecker had a 4 cylinder c210 sedan yes"" sedan"" not wagon

with leaf springs. it had the 1.8 motor the same as a 180b.

Cheers

Don't know where you got this information, but the first factory EFI (L-Jetronic by Bosch) was on HGC211 & S30 280Z as far as I am aware.

D

Link to comment
Share on other sites

Don't know where you got this information, but the first factory EFI (L-Jetronic by Bosch) was on HGC211 & S30 280Z as far as I am aware.

D

The first efi that nissan fitted was used on the cedrics in 1973 and if im right in japan they go back as far as the late 60;s

EKW WRECKERS in Melbourne had a 1974 2 door coupe ''240''C which which is a cedric in Japan it was a mint green and fully fitted,IT HAD THE EFI SYSTEM, K Jetronic.

even had an air purifiyer for the rear passengers when they smoked.

it was offered to me for $1.200.00 I had no money at the time, and my friend bought it in Nowra.NSW.

as you can tell im not as young as you guys, but believe me ive seen strange things in nissan cars, the 70,s was a great time.

Cheers.

Link to comment
Share on other sites

The first efi that nissan fitted was used on the cedrics in 1973 and if im right in japan they go back as far as the late 60;s

EKW WRECKERS in Melbourne had a 1974 2 door coupe ''240''C which which is a cedric in Japan it was a mint green and fully fitted,IT HAD THE EFI SYSTEM, K Jetronic.

even had an air purifiyer for the rear passengers when they smoked.

it was offered to me for $1.200.00 I had no money at the time, and my friend bought it in Nowra.NSW.

as you can tell im not as young as you guys, but believe me ive seen strange things in nissan cars, the 70,s was a great time.

Cheers.

Also i need to add R30;s in kuwait were imported with a carburettor not with Fuel injection, :devil: the c211 and 280zx only had efi.

also the some of r30 had the H165 Solid axle diff in Kuwait, the gtex had the independant diff.

Link to comment
Share on other sites

didn't know about C111 having fuel injection.

did series 1 c210's have fuel injection JDM?

leaf springs on a 1800TI doesn't sound right, unless they had non independent suspension for the lower models.

yes, and they are not as collectable there,Japan.. the earlier C110 is and very expensive too, the Japanese love them.

the c210 JDM has fuel injection,I own one. the gtex and the gtes, the gtel had a 2 litre carby and is a slug to drive, it has too much

emmission controls.

Very true about the 1800 skyline, it had the wagon system fitted with the solid axle, but remember they were rare and only a few had that set up. Malaysia, and Singapore had some of these cars they used them for Taxis.

as for the efi fittings nissan fitted them in the last of the 180b...bluebird in japan in 1976,

Cheers.

Link to comment
Share on other sites

Don't know where you got this information, but the first factory EFI (L-Jetronic by Bosch) was on HGC211 & S30 280Z as far as I am aware.

D

Mario has a fairly awesome collection of English/Japanese books and brochures relating specifically to the C210/C211. Not to mention 25+ years behind the wheels of his C210s. I'd trust anything that he posts to be very well researched.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Neostead, I'm looking to have a custom surround done that also has a slot for a fog light. Would you be willing to create a 3d model I can buy or create and ship me the part or even provide/sell the current model for me to modify? Cheers
    • Did some maintenance on the MX5, did the engine oil and filter which was uneventful, then I drained the coolant to put in the new reservoir and a thermostat, reservoir took 5 minutes  The thermostat, well that took.........3 bloody hours, what a job, the issue was the 3 bolts holding it on, one was easy, 2 were hidden and required a few 1/4 drive extensions, 1 more than I had, and a 1/4 swivel, which I also didn't have, and a good amount of playing contortionist  Getting the 2 unseen bolts back on was a time consuming nervous nightmare, as I couldn't see where they went there was alot of stabbing and hoping for the best, trying to line up a 8 mm bolt straight, which you cannot actually see or get a hand in there, with a 1/4 swivel in the mix was a nightmare Anyways, it's done now, all burped out, and run up to temp a few times, happily no leaks thank Jebus After the thermostat fiasco I decided I need a few mental health days away from tools before doing the rest of the servicing on it As for the Dunnydoore, it had the aircon regassed and it has a clean bill of health, thinking about taking it out on Monday for a cruise down the coast to look at some houses if weather permits 
    • In other important race car news, instead of fixing the race car I changed the crank seals on the chainsaw, because wood burner Some damn tight (and lock tighted) m6 head bolts Who knew plastic crank cases were a thing! Quick tip, don't trust the youtube videos that say you can pull the old seals out with the head on in a husky 440e...not true, their crank seal tucks in behind the cover both sides. I'm not sure I'm a psychopath, but these things are damn loud....hope I can put all the bits back in the right place    Happily, it is now back to turning fallen trees into a combination of firewood logs and wood chips....just need a clear day to get into it properly
    • I've got 60L of e85 in there at the moment
    • Don't forget to make sure the tank is full to the brim before you try to replace the fuel pump too, that is an essential step.
×
×
  • Create New...