Jump to content
SAU Community

Recommended Posts

Hey guys,

Just purchased an Evo 8 MR from Sydney.

It's being transported here right as I type this.

Question: Is it better to go to Regency or Lonsdale for the ID check?

The car has mods:

Full exhaust

Haltec Computer

Cams

HIDS

I'm not worried about the cams, but everything else I'm sweatin about.

Will I need to take the car to exhaust tech. to have baffles fitted (just a regular turbo back exhaust).

The haltec is plug'n'play so I might have to find someone I can borrow a standard computer for a day.

Are HID's easily removed for a day - or is it a massive pain in the arse job?

Thanks for any help.

Edited by CONRAD

I took my 2010 jeep patriot through lonsdale for a ID check and they tested my window tint cos it looked dark. The guy next to me with a new lexus failed for tint to dark. They will check over your car.

the HID's will be fine aslong as they are auto leveling :)

No they won't, they also need to have a washing system, which no compliance workshop in Australia fits. If anyone has made it through with HIDs in an Evo, it's purely by luck.

Just remove anything obvious....when I took mine, they told me wheel spacers off and Fuel Pressure Reg, but I had bigger issues as car came from QLD and had a 'Mod Plate' for compliance in place of a 'Compliance Plate' and they refuse to recognise the mod plate...The guy at Lonsdale is a decent bloke but he works at Regency for the rest of the week so its same same...

I'd remove the ECU if you can borrow one, if its loud and cammy, def baffles in the exhaust, take the tint off the front windows atleast if its dark...by doing a few small things up front, it may save you having to go through a full inspection...dont give them the suspicion to begin with.

Just remove anything obvious....when I took mine, they told me wheel spacers off and Fuel Pressure Reg, but I had bigger issues as car came from QLD and had a 'Mod Plate' for compliance in place of a 'Compliance Plate' and they refuse to recognise the mod plate...The guy at Lonsdale is a decent bloke but he works at Regency for the rest of the week so its same same...

I'd remove the ECU if you can borrow one, if its loud and cammy, def baffles in the exhaust, take the tint off the front windows atleast if its dark...by doing a few small things up front, it may save you having to go through a full inspection...dont give them the suspicion to begin with.

????????

mod plates and compliance plates are two totally different things. in qld, if you modify your car and it is certified by an engineer, you then get a mod plate to say that your modifications are legal. the mod plate won't be recognised down here anyway, beacuse laws surrounding modifications are different from state to state.

i've never seen or heard of a mod plate trying to be passed off as a compliance plate. something's a bit sus with your car mate and i'd be asking questions.

????????

mod plates and compliance plates are two totally different things. in qld, if you modify your car and it is certified by an engineer, you then get a mod plate to say that your modifications are legal. the mod plate won't be recognised down here anyway, beacuse laws surrounding modifications are different from state to state.

i've never seen or heard of a mod plate trying to be passed off as a compliance plate. something's a bit sus with your car mate and i'd be asking questions.

Yes mod plates are different to compliance plates , in Queensland you do not require ADRs (Australian Design Requirements) for cars 15 years + imports .

In Queensland they just install new seat belts , run it through a workshop and thats it , dodgey as F......

When the car is taken from Queensland to another state thats when the trouble begins - child restraints , side intrusion bars ETC.............owned $$$$$$ for compliance!

i got thru regency with a turbo-back zorst, xenons, WAY too dark tint, front mount, lowered ride height - everything else standard. I took off the fat wheels, boost cont, turbo timer etc and cleaned it up nicely.

The guy who inspected (George was his name) was a champion - he said 'Mate your car looks a little bit lower than standard and your tint is WAY too dark. And im not too sure about those headlights either...get out of here mate'

I would trawl the evo forums for a standard exhaust and computer, there prob isnt much you can do about the headlights unless you wanna buy some cheap foglights and have a crack at changing them yourself - or pay an auto electrician a fortune to do it. im sure the guys on here will have some tricks up their sleeves :blush:

Its all about luck (if you leave the illegal mods on it anyway), and the only reason i risked it is because my missus told me to grow some balls and take it down there before the rego runs out :D

I pissed three times on the way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...