Jump to content
SAU Community

R34 Siemens Deka Injectors


jimmy21
 Share

Recommended Posts

I'm running them in mine with nistune. only the 550's though. Idle like a dream and just pulled 291rwkw on e-flex (e70) with plenty left in them..

as long as you can adjust the Injector latency (the "turn on time") then they'll be jsut fine :blink:

And I'm positive you can adjust this on a powerfc!

Link to comment
Share on other sites

Has anyone ahd any experience with these injectors for a R34 gtt with a power fc?

http://cgi.ebay.com/ebaymotors/Nissan-Skyl...sQ5fAccessories

Cheers

I bought this same kit but in 650cc. Running a nistune, not a problem

I did have problems with the cheap chinese HKS copy fuel rail

Injectors would not seal well in rail. Injectors tops had to be machined slightly to seal (mechanic did this)

Also the ends of rail were not 100% square so fuel in and out of rail was leaking. Had to machine ends sqaure.

Fitted the up to a greddy style inlet mainfols on a Neo 25.

Link to comment
Share on other sites

nar no need for the fuel pressure regulator. But you will need to upgrade your fuel pump if your gonna make good use of the size of the injectors

I've heard nothing but good things from croydon.

I'm in the ACT so i can't really help out much more than that.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • I've driven that one and it's a great deal and drives nice. The owner definitely treats it right on track. You would have gotten it for what you paid for this one too.   Keen to see what you do to this one. 
    • I have a question with regards to R34 GTR guards. All the info here is quite old. Useful, but old. At what point does the bumper itself become a clearance issue with wide wheels on a R34 GTR, specifically the part I've drawn in red here: All of the info that people post about implies that 285 is as far as you'd go before scrubbing becomes an issue, but they speak of hitting the inner plastic liners, not the bumper itself. Just how wide could you go if you took the liners out? Has anyone done it? I have been messing with my own car and spacers and heavily cursed my lack of planning, but I might not feel so bad if there's actually no gains to be had by going a GTR guard and front bar combination for $5k+ of money I do not have after spending about that much already on my solution which now has problems. (Woo) At least I now know why GTR guards and bumpers flare out like this over their GTT lesser cousins. I feel that in 2024, someone has gone further and attempted to run 315's or somesuch on the front of a R34 GTR. If you have, please post. If you're tried and failed for some other reason definitely post so I feel better about my mistakes
    • Genuine URAS Type R front guards in FRP. These will fit a GTT. They will only fit a GTT. If you have a GT or GTT and want wider fenders with a Z tune look up top, this is what you want. You use this with a regular GTT fitment bar. Not a GTR bar. They fit GTT guard liners and plastics, not GTR items. So if you're reading this thinking "Ah! I have a GTT or GT and want wider front guards that bolt directly on, but do not want the hassle of changing my bonnet and bumper and plastics and undertrays or anything else, this is what you want. The fitment is annoyingly perfect. I really would rather someone pick these up in person and not ship them. SE Melb.
    • Why didn't you buy the one I originally linked in QLD which was about 18k and in massively better condition with about 30k of tastefulmods holyshitmygodjesuschristman.
×
×
  • Create New...