Jump to content
SAU Community

Recommended Posts

Up for sale is my Holden Vt Calais Series 2

P PLATERS DREAM!!

After offers or swaps! must be a manual!

Cant be a turbo, supercharger or an 8!

V6

Champagne colour

Factory sunroof!

159xxx kilometres!

Full leather interior

19" ssv rims

SL's in the front

SSL's in the back

Windows recently tinted! 35% in the front 2 windows, 17% the rest

Duel Fuel

Full woodgrain interior!

Kenwood headunit, 6" 3way speakers in door and 12" sub in boot!

Comes with stock springs and stock calais wheels!

also has towbar!

Pictures Below!

Not in any hurry to sell! wont sell unless i get the right offer!

give me some offers and swaps!

0400419234

thankss smile.gif

post-60547-1289287484_thumb.jpg

post-60547-1289287532_thumb.jpg

post-60547-1289287555_thumb.jpg

post-60547-1289287583_thumb.jpg

post-60547-1289287626_thumb.jpg

post-60547-1289287652_thumb.jpg

hey mate, just a few questions, what year is the car, you havnt specified? also how neg are you on 10k? seems to be a bit off the mark if you dont mind me saying.

hey mate, just a few questions, what year is the car, you havnt specified? also how neg are you on 10k? seems to be a bit off the mark if you dont mind me saying.

hey buddy its a 1999 model. series 2. give me an offer.. ur welcome to come view it if u like?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...