Jump to content
SAU Community

Recommended Posts

Below is a list of a whole lot of crap that I have no need for anymore, if its not listed then i dont have it for sale

Part: Gates T306 Timing belt

Condition: brand new

Description: 150 teeth suited for rb30de without tensioner relocation, early warning the teeth do get really close together, box isnt the greatest, (sat on it)

Asking Price: $10

R33 RB25 Stuff

Part: R33 RB25 VCT cylinder head

Condition: Reconditioned, was going to convert to rb26 valve train to put on a RB30 bottom end

Description: Head is bare, Needs Exhaust guides and surface grind and assembly, has Been acid bathed, bead blasted, flow bench ported, Valve seats have been cut to suit a 1mm oversized valve and have been cut with a CNC seat cutter (usual 30deg crown 45deg seat and 70 deg throat and seat blended into the port) its had a bung/ grub screw tapped and fitted to the VCT oil drain, and has been cut out with a die grinder to suit bigger cams

Asking Price: $450

Picture-0113.jpg

Picture-0114.jpg

Picture-0115.jpg

Picture-0116.jpg

Picture-0117.jpg

Part: R33 RB25 VCT Cams

Condition: Used, standard, still has VCT thingy on intake cam

Description: stock, VCT, thats about it i guess

Asking Price: $20

Picture-0109.jpg

Part: R33 RB25 standard Fuel rail/ Injectors, injector wiring

Condition: used

Description: Unsure if the injectors flow, havent had them cleaned

Asking Price: $20

Picture-0111.jpg

Part: R33 RB25 Cam covers & Coil pack cover

Condition: Used but clean

Description: Acid bathed, bead blasted, repainted black, coil pack cover un painted

Asking Price: $50

Part: R33 RB25 upper plennum & throttle body

Condition: Used

Description: Perfect for someone looking to cut and shut to make a twin throttle body RB25 manifold

Asking Price: $10

Picture-0110.jpg

Part: R33 RB25 Intake manifold

Condition: Half Modified

Description: RB25 intake manifold was going to modify it to suit the rb26 ITB but didnt happen. All that is needed now is the plates to be welded on drill bolt holes and done

Asking Price: $50

Picture-0107.jpg

R33 GTR RB26 Stuff

Part: RB26 ITB

Condition: used

Description: 6 independant throttle bodies and the linkages, nothing else

Asking Price: $80

Picture-0106.jpg

Part: R33 GTR RB26 Cams

Condition: Used, Standard

Description: Used standard, out of a r33 rb26

Asking Price: $20

Picture-0108.jpg

Part: RB26 head gasket

Condition: Brand new (still in packet)

Description: Ajusa Brand, material style head gasket, never used still in packet

Asking Price: $30

RB30/ R31 Stuff

Part: Standard flywheel

Condition: Used

Description: Done about 15,000kms, was balanced before, bit of wear but didnt have any clutch issues before removing, was used with a heavy duty clutch

Asking Price: $20

Picture-0104.jpg

Part: rb30 reground cam

Condition: used

Description: Standard cam reground to, 261deg duration cant remember the lift, need to chip the ecu, and have 0.030" (0.8mm) ground off the lifter houseing

Asking Price: $40

Picture-0105.jpg

Part: R31-RB30 Standard harmonic Balancer

Condition: Used

Description: its a harmonic balancer... alternator/water pump, air con, power steering belts, one piece,

Asking Price: $10

Picture-0112.jpg

Part: R31/RB30 Extractors

Condition: Used

Description: 3-2-1 pipes, press bent, mild steel

Asking Price: $70

Picture-0102.jpg

Part: Just Jap R31 Front bar and lip

Condition: Damaged used

Description: Damage on passenger side, lip hasnt seperated from bar, Will suit fibre glass repair

Asking Price: $150

Picture-0049.jpg

Picture-0097.jpg

Picture-0098.jpg

Picture-0100.jpg

Part: R31 dash skin, drivers side head light drivers side guard standard bumper

Condition: used

Description: dash skin is brown, head light works fine, guard is grey, bumper tried sometwhing and now it may only be good to make a flip lip

Asking Price: $10 each

Picture-0103.jpg

Location: Fairfield Sydney NSW

Contact Details: Via PM (serious buyers will receive number through there)

Pick-up/Postage Arrangements: rarely get to a post office during work hours so postage may be a bitch, pick up arrangements will be made in details through PM's

Other Comments: this crap is going as is, its not an urgent sale, and everything is pretty cheap, dont need any other parts so no swaps

Edited by Gerg_R31

Part: rb30 short motor

Condition: used/ dirty

Description: N1 water pump 12 month olds, factory standard oil pump, standard size bores, other then excessive carbon build up on the pistons motor is fine, oil & filter changed every 5000kms, pulled out to put in project motor

Asking Price: $300

Part: RB30 Head (with manifold and injectors)

Condition: dirty used

Description: 6 cylinder 2 valve, blown head gasket from #4 cylinder into the oil (pressurising the oil) other then that head has been lightly ported (de dagged and smoothed out) standard cam and factory standard lifter housing

Asking Price: $100

Hi i would like to buy some parts of you i am new to skylines Australia so i cannot PM you i am based is western Sydney myself so would be able to pick up and pay cash.

Thanks Craig 0459361607 :P

Hi i am interested in the fuelrail/injectors the 25 top plenum and the cut down 25 manifold.

I can receve your PM,s but cant reply to them until i get 10 points.

Email me or ph [email protected]

Where abouts in western Sydney are you around.

Thanks Craig

Intake

0.100" 49.0

0.200" 96.0

0.300" 124.0

0.400" 144.0

0.500" 154.0

0.550" 157.0

0.600" 159.0

Exhaust

0.100" 44.0

0.200" 78.0

0.300" 98.0

0.400" 101.0

0.500" 103.0

0.550" 104.0

0.600" 104.0

yeah with the rb26 solid lifter conversion you can run rb26 cams and these were machined out to suit 10.8mm lift, i also tried to run rb26 valves which is why the exhaust valve guides need changing. only thing that held it back was there was no valve springs that suit the extra height thats needed

Hey mate, new to this site so I cant pm you....

I want to buy the RB26 cams & RB30 flywheel if you havnt sold them. I have the cash waiting.

Please call or txt me on 0488 526 213 or send me an email to [email protected]

Cheers, Rik.

rb26 cams sold

rb26 head gasket sold

rb30 flywheel possibly sold - pending payment

rb30 cam possibly sold pending payment

rb30 harmonic balancer sold pending payment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...