Jump to content
SAU Community

Recommended Posts

I was talking to my boss about the electric fans just yesterday, asking him how hard it was to set it up. He reckons it was a piece of piss and he even told me that I could have the brand new fan out the back that he never got round to fitting on his old mazda.

Just gotta make sure that when you set up the electrics, you make them trigger off your A/C switch and also from your adjustable thermometer.

Sumo

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-690303
Share on other sites

yeah i think i'm going to get one myself. the clutch fan packed it in so i took it off which means that all i've got left is the little thermo on the front which seems to be doing well so far. gotta drive with one eye on the temp until i fit a thermo tho

if you can fit a thermo to make good use of the factory shroud it should work efficiently with one fan.

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-690346
Share on other sites

Two things to look out for:

1. You have to set up a system that forces the air to go thru the radiator. Otherwise, the air simply passes out underneath the car and the engine overheats.

2. You need to re-wire the small fan out front of the A/C radiator. This is a thermo fan, and only comes on when the engine gets too hot. Without cooling air (normally provided by the standard clutch fan), the A/C gas over pressurises, and it sounds like a BOV going off.

IMHO, the power gains (couple of kW) are not worth the headaches.

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-690611
Share on other sites

where do you get these thermo fans from. I looked on the davies craig site and a 16 inch is over 300 bux (for all the 16 inch kits). Thats a bit much don't u think, I want to upgrade to clear future piping but does anyone kno of any other good fans that are a little cheaper.

Also couldn't u hook up the wiring so that the fan will only work when the thermo opens. That would be good for those cold morining starts, coz the clutch fan always spins.

rom.

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-691060
Share on other sites

I know a fair few of you are sceptical of thermo's, but all the big semi's run an electic clutched Horton fans, and if setup correctly from the start have no problems with them what so ever. I was thinking of getting a shroud off a car with a similair size radiator and modifying it to suit.

Sumo

P.S. Only problem I have is how do they stop the thermo's from overspinning at higher speeds?

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-691529
Share on other sites

Ok I have now installed a 14inch daviescraig fan, brought from Burson auto parts, cost me $120 but i get cost from there.

It works great, you can also get a themro switch which you place in the radiator housing and once it is up to the temp you want it to it will kick in, takes a while to adjust but it works nicely.

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-691695
Share on other sites

My 16 inch Davies Craig hasn't missed a beat in over 12 months.

Temps are stable, engine responce up a little, and had no problems.

As said before, you need to re-wire the AC fan to come on as soon as you turn the AC on - I've got a thread on this so do a search.

I'm running the thermo switch as well and have found that in winter it pretty much never turns on with normal driving, and only comes on occasisionally when stopped still for 5+ minutes.

Summer it'll come on for 1-2 minutes then stays off for 3-4 minutes.

One thing I found with the Davies Craig kit is that the fuse holder you get with the kit is CRAP... Replace it straight away with a good quality one that can handle heaps of current. Mine melted after about 3 months !!

The 16 inch version draws 19 amps while just spinning, on startup it'll peak upto 30 amps.

The only reason why I ditched my old one clutch fan was cause I thought it was stuffed, and I got the DC 16 kit cheap. I later found out that it wasn't the clutch fan that was stuffed !!!

J

Link to comment
https://www.sau.com.au/forums/topic/34468-thermo-fans/#findComment-691761
Share on other sites

  • 7 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...