Jump to content
SAU Community

Recommended Posts

Morning,

The other day I was defected for not having a mod plate for a top mount manifold. On the defect notice the officer wrote

Turbo installed. Needs mod plate.

also got done for being to low and he wrote

Modified suspension too low guestimate at 60mm.

With the too low fine it was the exhaust not the car itself that was at the low spot. The suspension has been changed (coil overs) but hasn't been lowered. I spent the day getting the mod plate fitted and also getting the exhaust raised up a bit.

I have to go to court to be issued the fine, but i'm thinking of challenging it as what they wrote on the fine was incorrect. It wasn't a "turbo installed" it was a manifold change. The standard turbo was top mounted. The suspension wasn't too low it was the exhaust. Giving you this amount of details is there anyone out there in intertube land that works in legal or has a intimate knowledge of legal stuff, give me any advice? Would I have a chance at challenging those fines ? I am willing to accept the too low one as it was lower then 100mm although one side of the car was parked right in the gutter but I have no photographic evidence so i'll take that one on the chin.

Any advice would be very helpful. And if this in the wrong spot can someone move it to the appropriate thread.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/
Share on other sites

+1.. Tell them his guesstimate was wrong and car is 100mm (with evidence).. No point admitting guilt when he wasn't using correct equipment and procedures.. Tell them you was in the gutter and sloped road so may have thrown off the measure..

You could possibly challenge the turbo one but if the copper classifys what he wrote and what it was for i'd judge that they would have the fine stand.. If the copper isnt present then possibly may get away with it..

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5570416
Share on other sites

Yep, its a wheel on the end of a pole. They role it under points of the car that may be below 100mm.

e.g. Front, skirts, exhaust.

I tried to plead not guilty on one of my defect offences. But the defect notice is counted as one complete offence. So I was asked, were you driving an illegally modified vehicle. Answer was simple, yes.

$100, 1 point, - first ever law enforcement encounter and it was a major defect.

Good luck

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5570687
Share on other sites

I think they usually use some roller stick thing that's 100mm in diameter, they wheel it under your car and if it hits anything thats how they prove it. My source is boostlosing though so may or may not be true.

They used a length of rhs with two aluminium wheels attached to the end. The wheels where marked with "100mm". Interesting though it was only long enough to go just past the rear diff.

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5570703
Share on other sites

If your keen on challenging it in court google the legislation and have a good long read, i got ticketed for speeding (alleged 92 in an 80) and took it to court and after 6 months of stuffing around i got off. Do some research and youll quickly know whether its worth fighting or not.

There are pretty strict rules on how everything has to be done and if you can create enough doubt to the judge that they wernt followed youll get off.

For mine i ended up having 5 days off work to attend court (casual so not paid) which cost me more than the original fine wouldve anyway.

Still worth it on principle though!

Good Luck

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5571286
Share on other sites

there is no point fighting defects in court. in qld with the exhaust manifold its just a case of emisions test not a mod plate, i feel sorry for you if i you paid to have a fake mod plate fitted. as for the 2 low, they tested and you failed.

sorry but as of the (qld/aus ???) laws they can even wright the wrong type of car and as long as it has your name on it its still a valid fine.

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5571348
Share on other sites

Dont even bother fighting it in court.. It will cost u more money than more happiness. They wont give a crapola if it says the wrong thing.. They will just issue u a new fine, I fought a fine a few years back over an alleged speeding.. Took 6months & i just got over it n gave in. Unless u r gonna lose ur licence because of this i wouldn't even bother trying. They are the law n will always hammer us. The realistic truth.

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5571372
Share on other sites

From my own experience with the QPS, I was issued a fine three times. The first two times they had incorrect information. I wrote to the Superintendent of Traffic and in a lot less words, was told that the QPS can reissue a fine until the details are correct. So unless you want to fight it in court & part with some serious cash, I'd cop it on the chin.

You have your mod plate now for your manifold, and they go off the lowest point under the car. I used to get done all the time in my S13 Silvia for being too low. My lowest point was 65mm of clearance.

Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5581387
Share on other sites

trying to argue that the 'suspension isn't low, the exhaust is' is pointless

arguing that he didn't use the correct measuring equipment and guessed the distance from the ground to the exhaust is the way to go, it's exactly the same premise as when the cock smokers don't get a reading with a speed tracking device but give you a ticket based on how fast the think you were going - easily defendable in court for a lawyer

the exhaust manifold - that's a toughie as someone said above they can reissue the fine if they put the wrong details on, the old 'they put the wrong colour of my car on the ticket' or 'one of the letters in the rego looks wrong' loophole with fines is nonexistent now

Edited by mystery_kid
Link to comment
https://www.sau.com.au/forums/topic/345868-police-fines/#findComment-5582565
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I am getting the same issue. Did you resolve it? I just got it after installing my new super coppermix and literally the same issue, new fork, new 18mm carrier, release bearing that came with the kit and replicated the exact same sound. 
    • If you like - I have the STL files so I can email em. There's a couple of gotchas (i.e the holes are not threaded so you might need/will need) to utilize some M3 melt-in threads for some of the points. However if you want to be super accurate, and are willing to remove your calipers and your SHOCKS it's a really good tool. You also might need to scale the part that measures the tyre width a bit wider. It defaults to a 7.5in tyre and I mean who is running that. Luckily with the magic of CAD this is very easy to rescale.
    • jeebus. glad you weren't under it while performing the stunt. Also thanks for the link to the wheel measurer, exactly what I needed
    • In the older stuff there were very significant differences 2wd to 4wd, for example Stagea had strut front end for 2wd and double wishbone for 4wd so it was not minor to swap. From poking around the 2wd v37, it *looks* like it might be more possible; some of the parts specifically have "2wd" stamped on them which suggests the platforms are more similar. You'd still want to start with a 4wd half cut to swap stuff from though. I'd suggest if you don't have a tune on the ECU you don't really need one on the trans either. Throttle mapping is in the ECU side (and you can always use a Roar Pedal if you want the throttle to actually respond to your foot), and really if you are happy with the stock power you probably accept the stock trans behaviour too....its all made to be "sporty" not racey.
    • So, updates. I have not washed the car since it came back from Tassie. I've driven it around a bit but not got around to actually sorting it out. I DID raise it because I cracked the rear bar leaving a hotel which was very distressing. Interestingly, the car drives more compliant now that it's raised a fair bit (5mm front, 15mm rear). Also noticed that my FR height was 10mm lower than FL. So that's now sorted out, too. I also bought this and had it printed: https://www.etsy.com/au/listing/1576422240/wheel-and-tire-fitment-tool-universal?ref=shop_home_feat_1&dd=1&logging_key=08f604d9fa4cc383550ba985e6ac85cd5cac7fbb%3A1576422240 Now, if I was smart I would have taken my brake calipers off to actually use this correctly but it was evident enough to me that in the region where the caliper was... there was nothing to hit suspension/guard/arm wise. So I'm going with "it'll be fine" after using the tool to hopefully very precisely measure the wheel clearance. Also while doing this, I had the very VERY bad idea of jacking one of the wheels/suspension arms up while the rest of the car was on jack stands. I did this to see how the arm would travel. This all was well and good until the car slid off the stands and went through a fence. So don't do that. Incredibly nobody was hurt and there was only minor damage to the rear bumper as the car didn't have far to slide, and had 3-4 wheels on it. The only damage turned out to be the fence itself which was easy to fix, and a little bit of damage to the fibreglass rear bumper trim. I had already planned to try a touch up paint kit to fix the time I drove into my garage door to see if it'd help in the interim before I get it fixed properly. I used the Dr Colorchip kit after looking online and seeing everyone talking about it. Yes it's made for chips and not huge broken missing pieces and I'll be 500% recommending it for stone chips after using it for stupid things like me. This took about ... 10 minutes and looking at the half assed photo the 30 second job I did on the bumper corner was almost perfect just by using the tiny little brush and painting it in. The sealact stuff to remove over-painting is really useful, so if/when I do it again I'll likely slather the touch up paint well over it and then clean it up with the cleaning solution. The wheels should arrive in a couple of weeks. I am still kinda confident after doing a stupid amount of measuring (and borrowing a set of 18x10.5+15) that they will not fit because I overlooked something, somehow and flew too close to the sun. ALSO R34 GTR guard liners do not fit on a GTT. I bought the undertray brake duct guides and had the wonderful problem of them not fitting my intake, my oil cooler and the liners themselves were even worse. Attempting to fit them won't work in general - You would have to cut them up as another poster mentioned as the bodywork is different on the GTT. At least I can try to resell them. So instead of cutting those up, I cut up my old already-cut-up GTT liners and extended them by using some PP plastic and drilling some 8mm holes for some nissan clips for the 'extra' bit. Because I was happy to cut them I was able to mount them pretty damn forward so I now have some semblance of guard liners, and the brake vents seal the bumper from the bottom. It sort-of-looks like this, to give some idea - If you look at the GTR and then the GTT this is when I realised that I needed to seriously measure as the inside of the rim area is entirely, entirely, entirely different and could not take any internet measurements for granted.   
×
×
  • Create New...