Jump to content
SAU Community

Recommended Posts

Hi guys, I recently bought Nick's (racsov) C210 project and I'm in need of:

1 x bonnet (small dents acceptable, minimal rust please)

1 x rear bumper (minimal dents / no rust. No plastic end caps or mounts needed).

I'm located in south east Queensland so anywhere close-ish would be ideal, otherwise I'm willing to pay for postage for the bumper. The bonnet would be strictly pick up at this stage. I'm not sure how much these parts go for so please pm me with a price / pics if you have any of these items.

Thanks guys. :D

Edited by hao
Link to comment
https://www.sau.com.au/forums/topic/346062-wtb-c210-bonnet-and-rear-bar/
Share on other sites

You have almost no chance of finding the parts you want in the condition you described. Bonnets are invariably rusted under the front lip, and bumpers bend with the first light knock. I'd be snapping up any rubbish you can find and budgeting on rust repairs, repainting and rechroming to get them back up to scratch. Good luck.

I had a hunch finding parts in the conditions I described would be tough. Just thought I'd give it a shot anyway, you never know. :blink: Unfortunately I don't have room for a parts car, otherwise I'd have done this.

coupe72001, my bonnet is rusted (bad) in the exact spot you said. haha. I can repair this myself but if I can find a bonnet in better condition then the one I have now, it'd be much easier.

Thanks guys for the help.

Edited by hao
You have almost no chance of finding the parts you want in the condition you described. Bonnets are invariably rusted under the front lip, and bumpers bend with the first light knock. I'd be snapping up any rubbish you can find and budgeting on rust repairs, repainting and rechroming to get them back up to scratch. Good luck.

The cheapest to recond: a bumper down here is $300.00. They;ve all picked up on this now... anywhere you go now

it costs big bickies to recondition anything.. it does pay to put aside a whole car..if you have the room.. :down:

Are they NOT available new out of Japan? Has anyone asked their local Nissan dealer about the availability of a new bonnet??

Sure it might be expensive, but what price do you put on CAN'T GET in AUSTRALIA???

D

Are they NOT available new out of Japan? Has anyone asked their local Nissan dealer about the availability of a new bonnet??

Sure it might be expensive, but what price do you put on CAN'T GET in AUSTRALIA???

D

Fibre glass ones are the go in Japan these days, painting them are a""NO NO"" and they wobble at speeds

a bit like Rolf Harris wobble board.

I wouldn;t want it on my car... id rather pay up..."" Kidney prices""

Cheers.

Hi guys, I recently bought Nick's (racsov) C210 project and I'm in need of:

1 x bonnet (small dents acceptable, minimal rust please)

1 x rear bumper (minimal dents / no rust. No plastic end caps or mounts needed).

I'm located in south east Queensland so anywhere close-ish would be ideal, otherwise I'm willing to pay for postage for the bumper. The bonnet would be strictly pick up at this stage. I'm not sure how much these parts go for so please pm me with a price / pics if you have any of these items.

Thanks guys. happy.gif

I sent you a pic yesterday. The rear bar wasn't all that good, but without success, tried to get it off in any case. Where it was bent, it was hard up against the towbar and bolts not accessable. Sorry!

D

I sent you a pic yesterday. The rear bar wasn't all that good, but without success, tried to get it off in any case. Where it was bent, it was hard up against the towbar and bolts not accessable. Sorry!

D

Hi mate, I got the pic. Sorry about not replying, I was half way through something at work. Unfortunately I'm going to give it a pass, man. Thanks for your time though. :thanks: My current bumper is a bit better condition then the one in the pic, it's just a tad twisted and has a couple of small spots of rust. I guess I'll just spend a few extra doll hairs and get it straightened / rechromed.

I found some carbon fibre / fibreglass reproductions of C210 bonnets in Japan but they aren't cheap. oh well.

The FRP reproduction bonnet I found is 71,400 yen, no postage included. That's about $870 AUD + postage (which I guess would cost a fair bit being such a large item.) Then you've gotta add on commission for whoever you want to import it through.

The FRP reproduction bonnet I found is 71,400 yen, no postage included. That's about $870 AUD + postage (which I guess would cost a fair bit being such a large item.) Then you've gotta add on commission for whoever you want to import it through.

PLUS the customs duty because the value has to be under AU$1000.00 to get thru duty free, which includes cost + freight so you wont get out of it for under about AU$1200.00 minimum.

A bonnet is to big to come EMS, so duty will be involved due to it being part of the container load.

Your going to save about 15kg, maybe 20 tops?

Be easier & cheaper to go on a diet if you're worried about the weight factor.

D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...