Jump to content
SAU Community

Recommended Posts

Hi Guys,

does anybody have stock parts to replace the HKS hard piping KIT that came in my CAR "see pic"

Car is getting complied at the moment, complance center got the R34 GTR Stock Air Box

but don't have the actual stock piping (bit with the Twin Turbo written on it in a stock GTR)

Plus the stock washer bottle as the Car came with an aftermarket item "see pic"

I am willing to Rent / lease the bits or if you very generous "borrow for a little while" till the car is complied / rego'd and put back to Jap Spec

Location - Brisbane

Kushil

Hard piping Kit

img1554sd.jpg

Washer bottle

img1558y.jpg

I might be able to help with the pipework, how long would you need it for?

Thanks for the reply

i am guessing it would be for around 2 weeks normally, but my car has got a few mods to replace and due to end of year. i would say 3 - 4 weeks

i am happy to pay for you troubles and rent the bits of you and will give a deposit for you peace of mind

compliance is done at ISASO, so it not some unknown doggy place

the shop has asked around too and i only need the stuff if they can not source it. but it looks like they might not be able to

Kushil

  • 3 months later...

Do you still need help with borrowing parts? I need to borrow a stock R34 GTR bonnet for a day.

Simon 0408 766 268

I found all my parts

i am sure you can find Stock GTR bonnet from someone in gold coast

also put request via SAUQLD website

if you really get stuck, i can give you mine "which is black", but i am from tingalpa, which is a bit of a drive from Gold coast for a bonnet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...