Jump to content
SAU Community

Recommended Posts

Hi Guys,

does anybody have stock parts to replace the HKS hard piping KIT that came in my CAR "see pic"

Car is getting complied at the moment, complance center got the R34 GTR Stock Air Box

but don't have the actual stock piping (bit with the Twin Turbo written on it in a stock GTR)

Plus the stock washer bottle as the Car came with an aftermarket item "see pic"

I am willing to Rent / lease the bits or if you very generous "borrow for a little while" till the car is complied / rego'd and put back to Jap Spec

Location - Brisbane

Kushil

Hard piping Kit

img1554sd.jpg

Washer bottle

img1558y.jpg

I might be able to help with the pipework, how long would you need it for?

Thanks for the reply

i am guessing it would be for around 2 weeks normally, but my car has got a few mods to replace and due to end of year. i would say 3 - 4 weeks

i am happy to pay for you troubles and rent the bits of you and will give a deposit for you peace of mind

compliance is done at ISASO, so it not some unknown doggy place

the shop has asked around too and i only need the stuff if they can not source it. but it looks like they might not be able to

Kushil

  • 3 months later...

Do you still need help with borrowing parts? I need to borrow a stock R34 GTR bonnet for a day.

Simon 0408 766 268

I found all my parts

i am sure you can find Stock GTR bonnet from someone in gold coast

also put request via SAUQLD website

if you really get stuck, i can give you mine "which is black", but i am from tingalpa, which is a bit of a drive from Gold coast for a bonnet

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...