Jump to content
SAU Community

Recommended Posts

Hi Guys,

Some really nice sets of rims in stock that need to go in order to make way for the next few shipments coming through.

First up, we have some genuine VOLK LE37T in 17 x 9 +20, fitted with good Bridgestone T'S02 JDM rubber in 255/40/17. For those who don't know, the LE37T was the premium edition TE37 with painted centre and polished lip - same as the Top Secret edition TE37.

Currently $2300 - reduced to $2000. Don't like the colour? Paint em and you'll have the cheapest set of TE37 in this fitment anywhere. Perfect structural condition, just stone chipped and a little scratched.

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1095

------

2 sets of BNR34 GT-R stock rims

Set 1 - slightly better condition than set 2. Already cheap at $1650 - SAU special for $1550

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1133

Set 2 - slightly more scratched - already cheap at $1550 - SAU special for $1450

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1134

-------

17 x 9" +20 Blitz Technospeed Z1 - freshly refurbished.

To refurbish to this standard would cost close to a grand. $1750 is the current price, SAU speshal price - $1600

http://www.importmonster.com.au/shop/product_info.php?cPath=40_45&products_id=1131

---------

LOADS more sets of rims in stock, see something you like - ask for a discount

http://www.importmonster.com.au/shop/index.php?cPath=40_45&sort=2a&page=1 - page 1

http://www.importmonster.com.au/shop/index.php?cPath=40_45&sort=2a&page=2 - page 2



  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...