Jump to content
SAU Community

Recommended Posts

Item: Enkei Circulars 8" front (one tyre blown) and 9" rear (2% tread left) ie they need new rubber..... currently have 235 front and 255 on the rear and bald...... note: they have about two inches dish on the rear and one inch dish on the front

Condition: Near new... they just need a polish... no gutter rash... Have been sitting in my Shed for three years unused (when i wrote off one of my old rides)

Location: Adelaide Hills, South Australia

Price: $900 ono .... (would prefer that buyer pays postage at this price as they cost me $2200 second hand a couple of years ago)

Contact: 0432384679 or PM

Will post pics up within a week or so....... Bargain for such Rims at this price!

As per above comment It will be a pleasure to give some more information on them (might i ask what information do you need that is lacking!).... As per above comment..... Rims for sale (all information available is listed!) , they are round, you put tyres on them, your car will look funny without them and you probably would not get too far if you do not have some attached to your vehicle

How about things like Diameter... are these 16", 20". For all i can tell from your original post know they could be 24" rims. Oh yeah, and offset, just because it fits an R33 tells us absolutely crap all. R33s will fit from +45 through to +20ish without anything hitting.

Besides if you had bothered to read more than 1 post above your inane bumping you would see that i asked for DIAMETER and OFFSET.

Hey bro, I'm very interested in your Circulars but I really need to know the diameter and offset so I can make make sure they'll fit.

I have cash waiting but I'm going to check out some other wheels tonight so I need to know before then

Hey bro, I'm very interested in your Circulars but I really need to know the diameter and offset so I can make make sure they'll fit.

I have cash waiting but I'm going to check out some other wheels tonight so I need to know before then

They are 18".... Not sure of the offset but i had them on a 33 and they fitted over the brakes no worries..... i also have a set of wheel spaces if you want some extra room.

Give me a buzz on 0401994240 and i will tell you more about them! they are 114.3.... 5 stud.

They are 18".... Not sure of the offset but i had them on a 33 and they fitted over the brakes no worries..... i also have a set of wheel spaces if you want some extra room.

Give me a buzz on 0401994240 and i will tell you more about them! they are 114.3.... 5 stud.

Now was that so hard? You could have said that 4 posts ago. :down:

Edited by takai

Now was that so hard? You could have said that 4 posts ago.:worship::P:3some:

Not that i mean to be rude, but all of the information in that post was either within the title or the body of text in the first post..... you need to stop multitasking while posting... ie stop fogging up your glasses by not cranking your crank while reading posts and people may not need to point out the obvious to you.... they may also start taking you seriously and not laugh at you (and your crank lol) hehehehehehehehehheeeee have a good day... i know i have just made mine heheheeheheee lol :nyaanyaa:

:rofl:

  • Nope 1

Not that i mean to be rude, but all of the information in that post was either within the title or the body of text in the first post..... you need to stop multitasking while posting... ie stop fogging up your glasses by not cranking your crank while reading posts and people may not need to point out the obvious to you.... they may also start taking you seriously and not laugh at you (and your crank lol) hehehehehehehehehheeeee have a good day... i know i have just made mine heheheeheheee lol :nyaanyaa:

:rofl:

Sorry bro, bought other wheels because the dude could tell me what the offset was, needed asap with minimal fuss.

Oh, and in that reply above, you didn't state they were 18's in the original post brah

Item: Enkei Circulars 8" front (one tyre blown) and 9" rear (2% tread left) ie they need new rubber..... currently have 235 front and 255 on the rear and bald...... note: they have about two inches dish on the rear and one inch dish on the front

Condition: Near new... they just need a polish... no gutter rash... Have been sitting in my Shed for three years unused (when i wrote off one of my old rides)

Location: Adelaide Hills, South Australia

Price: $900 ono .... (would prefer that buyer pays postage at this price as they cost me $2200 second hand a couple of years ago)

Contact: 0432384679 or PM

Will post pics up within a week or so....... Bargain for such Rims at this price!

Here is your original post.

Not that i mean to be rude, but all of the information in that post was either within the title or the body of text in the first post..... you need to stop multitasking while posting... ie stop fogging up your glasses by not cranking your crank while reading posts and people may not need to point out the obvious to you.... they may also start taking you seriously and not laugh at you (and your crank lol) hehehehehehehehehheeeee have a good day... i know i have just made mine heheheeheheee lol :nyaanyaa:

:rofl:

Please indicate in your original post where you specify the size and offset. It seems your wanking has made you a bit blind.

Oh, and in that reply above, you didn't state they were 18's in the original post brah

Gee im glad that someone has eyes which arnt all cooked up with meth.

Sorry bro, bought other wheels because the dude could tell me what the offset was, needed asap with minimal fuss.

Oh, and in that reply above, you didn't state they were 18's in the original post brah

no problem at all

Here is your original post.

Please indicate in your original post where you specify the size and offset. It seems your wanking has made you a bit blind.

Gee im glad that someone has eyes which arnt all cooked up with meth.

hahhahaa what a come back... you must have a lot of friends no doubt just another pathetic hater.... I wish i was all negative from drugs that i could think up a non intelligent pathetic hating come back and ruin peoples posts, where are you from, are you from Elizabeth or something.... once again all of the information that i have is in the first few posts..... please stop wasting my time although you have made my day........ pathetic manequin... Even if you were interested i would not offload them to you, especially at this price. hehheheheheeehahhaaa i mean hoohoohoeoohoohooooe

  • Nope 1

any non pathetic haters out their want a decent set of rims for a fraction of the price they cost me second hand let me know.... hope you have a merry christmas

  • Nope 1

Wow are you a retard? - you had a potential buyer and were too much of a pole smoking neck Bearded red neck from port Adelaide to respond and get a smooth sale.

Were you meant to be a still born that somehow pulled through only to be dropped on his head multiple times, destined for a life of mediocrity and snoop dog jeans?

Learn not to suck please.

Thank you!

Edited by lolnic

Wow are you a retard? - you had a potential buyer and were too much of a pole smoking neck Bearded red neck from port Adelaide to respond and get a smooth sale.

Were you meant to be a still born that somehow pulled through only to be dropped on his head multiple times, destined for a life of mediocrity and snoop dog jeans?

Learn not to suck please.

Thank you!

Charming.... . congrats you have just confirmed some of my above comments about SAU haters / flamers.... and yes i am from port adelaide..... hehehehehehehehheee what a charmer... you will go far

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...