Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

I don't have the hardcover promotional book but...

I have the official NISSAN "Owner's Manual" in English distributed through the UK dealerships at the time eg. Middlehurst Motorsport - St Helens.

It has 10 chapters, and it covers all R34s. It is NOT the workshop manual.

I was thinking, perhaps if it weren't copyright, the whole book could be reprinted with a flipover binder.

Besides describing all the do-dads (like what light bulbs or fluids to buy), it's so useful in supplying tables of what's done at each service and so on...

Hmmm... maybe I should approach NISSAN about doing that?

Anyway, if it can still be obtained through NISSAN, the Publication No. is OM8E-0R334J0

And yes, as I said, it's all in English!

  • 2 weeks later...

English (UK) sales brochures crop up on eBay every now and then. Good exchange rate right now too. The ones I've seen (and one I bought) aren't for VSII or Nur but the standard model + Vspec.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...