Jump to content
SAU Community

Recommended Posts

putting my car up for sale as im planning on getting a house so moving away from the car scene for now.

details:

1997 Toyota Chaser JZX100

Factory Manual

Factory Sunroof

Dark green in colour

95000kms

the car is relatively stock with just some of your basic mods which include:

GAB coilovers (height and damper adjustable. rears are base damper adjustable so no need to pull seats out)

3" cat back exhaust into 3" blast pipes with twin 3" tips

Defi boost gauge

Apexi Panel filter

Carbon Fiber strut brace

genuine Wald international body kit.

17" supra wheels

a little about the car. i am the first owner of this car in Australia and it has been well looked after. i have owned this car for 8 months and all servicing has been carried out by Chasers motorworks eastside division. oil/oil filter and plugs are religiously changed every 5000kms using Motul tourbolight 10w40 oil and NGK plugs (service documents will be provided with sale).

the car is booked in for the 100k service and will be done before the sale of the car.

price wise im looking at offeres over $15000 and you get the car AS IT IS with rego till April 2011. the car will be sold without a road worthy at this stage pending on how much it actually sells for.

i also have a set of work schwert sc2 wheels which are currently on the car which is not included in the sale but if buyer wants the wheels as well, then we can work a price out.

if your interested and would like more details, send ma a PM or email me at [email protected]

7a43fc4d.jpg

60d3f0ad.jpg

1c6ba926.jpg

the car was also detailed recently using final inspection products done by one of their product tester of final inspection. since then the car has been washed and looked after using final inspection products and wash method as directed by damian at FI. every 2nd-3rd wash the car gets a coat of gloss booster to keep the shine.

5046316536_9e979db7b5_b-1.jpg

5046318468_d4857d2e78_b.jpg

InfiniteFocus-10-9.jpg

InfiniteFocus-4-2-12.jpg

5046320400_7da1b9e421_b-1.jpg

5046314484_febb9555d6_b.jpg

28ad3b6e.jpg

and finally this is how the car is atm witht he work wheels (as stated not included in the sale price but if buyer wants, a price can be worked out)

img1577r.jpg

e7b2f91a.jpg

thanks

Ash

  • Like 1

car is actually for sale now

$17000 as it is with supra wheels. if buyer wants work wheels we can work a price out.

car is sold without RWC but for a serious buyer might throw RWC in with sale.

thanks

price wise im looking at offeres over $15000 and you get the car AS IT IS with rego till April 2011.

Is the car 15,000 or 17,000? Two posts and two different amounts.. Let me know.

Cant edit thread. Was EOI to begin with price starting at $15k. After getting a number of PMs of various offer I'm looking for $17000 as it is with supra wheels.

  • 2 weeks later...

work wheeks ate 18X10 +25 rears and 18X9 +30 fronts 0disk for maximum dish so wont clear big brakes

thanks Mikhail

thanks mate but not looking to trade unless 34GTR +cash towards the GTR. but wont find anyone who would want to downgrade from a GTR to a comfort spec taxi lol

any offers below $17000 will be ignored. i wont even bother replying to your PM sp please DONT BOTHER OFFEREING ANYTHING BELOW THE POSTED PRICE.

i will not return the car to stock as firstly its not that modded and secondly i dont have the time to do so. the most i will do is change wheels.

also i got Trent at Status tuning to cuck the car on the dyno and see what read out its getting.

the car being stock other then cat back exhaust pulled 181rwkw at 10psi.

thanks

Ash

  • 3 weeks later...

no thank you.

going for a R34 GTR so unless you have one you would like to sell, please dont bother offering swaps with other cars :)

ta

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
    • It's been quite the ordeal but hey, at least you figured it out.
    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
×
×
  • Create New...