Jump to content
SAU Community

Need To Borrow Z32 Afm

MR 33

By MR 33,
in New South Wales

 Share

Recommended Posts

MR 33 Rising Star

MR 33

Posted
Posted

Hey guys, having dramas with my car. Wondering if anyone in c'town area can let me use their z32 afm for like 2 minutes to see if my electrical gremlin goes away?? Just wanna be sure afm has packed it in before buying another one. Cheers guys

Link to comment
https://www.sau.com.au/forums/topic/347910-need-to-borrow-z32-afm/
Share on other sites
  • 2 weeks later...
GTRPowa Rising Star

GTRPowa

Posted
Posted

I don't, but just to help, what's going on? If you know it's MAF related, get a screwdriver, pry the top off the square lid and check the 4 connections in there. The soldering goes bad. Took me 5 mins to fix and half hour before that I thought the world was lost. :P Only takes 5 mins to check that. :)

MR 33 Rising Star

MR 33

Posted
  • Author
Posted

Hey! Its a weird problem, car was on dyno trying to track it down. It's running rich and cuts out at certain load/revs. The wires leading to afm have melted so we're guessing it has shorted or something. Prick of a problem though, only happened after i blew a cooler pipe off for like the 8th time. On the last time it just started doing this. But yeah it all points to electrical somewhere just gotta find a z32 afm to cancel that out. Will give your idea a go though for sure :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...