Jump to content
SAU Community

Recommended Posts

Hi, Got a 2002 V spec II NUR in Mellinium Jade, 39xxxkm with LMGT 4 18x9.5+12 power FC with controller,sliding cam gears,N1 turbos,s/s front pipe, Ganador titenium exhaust,exerdy cusion button clutch ( to handle 306kwaw power) Nismo suspensions with oil reservior ,HKS EVC6 controler,720cc injectors etc.etc at $89800 ono.

Alex 0433878905

Campbellfield Melbourne

  • 2 weeks later...

hard to find a V-spec 2 for 55K~~

You can get a V-Spec 2 for 55K if you import and have the patience

Not sure about BB color V-Sepc 2

Got a Black V-Spec 2000 model with Nice mods for around 45K landed only last month,but you need to be pretty patient

Might be worth keeping an eye on the import shops as they usually list the cars that they have currently in transit. If one looks ok they will let you put a fully refundable holding deposit on it pending an inspection by yourself and a mechanic. Best part is if you like it then its yours but if you don't then just say its not good enough and you get your deposit back. Just make sure you get it worded that way when you put the deposit down.

Good luck with your search and like they said above just be patient.

I'm in Melbourne and considering selling my R34 Vspec, as I can' t use it as much as I want to, I ride my motorbike to the city every day and hardly use it on weekends. 60k is what would make me sell immediately.some quick info, to give you an idea.- yr 1999- Odo under 100k, timing belt is aftermarket upgraded anyways- bayside blue , full factory body kit- mildly tuned to 281kw @ all wheels, has heaps more potential- Brand new tyres and alignment just done- Like new inside out, you will hardly find a scratch- all seats retrimmed with new non slip leather- serviced every 5k- power fc, boost controller, intercooler, exhaust plus heaps more, looks immaculate top to bottom- too much to list, if you're interested , just pm me and you can have a look at the car in person.forgot to say something about the audio system, not a bad setup with amp+woofer & AVIC phone/nav/rev cam etc

post-52276-0-49239500-1296451453_thumb.jpg

post-52276-0-31797400-1296451578_thumb.jpg

post-52276-0-01413000-1296451549_thumb.jpg

post-52276-0-29373000-1296451831_thumb.jpg

Edited by M'ck'y

Thank you guys for the reply.

M'cky : nice looking car you have there!but im looking for v-spec 2 as the year is around 2001- 2001 =(

farch : good idea,but v-spec2 comes with different spec =(

thatlbeme : any recommendation on which import shop should i look at?p.s : i am located in adelaide,would be great if they have any..any suggestion?maybe outside adelaide perhaps? =)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...