Jump to content
SAU Community

Recommended Posts

Apologies that these are not Skyline's for sale, however I thought there might be some interest in the Vitara as a daily so it's worth throwing up an ad. And might as well try the bike here as well as bikesales.com and gumtree.com

I previously advertised the Vitara on SAU when it's motor was playing up but I've now extensively rebuilt it.....in fact I've spent over $6,000 on it.....(gulp).

Mobile: 0434 924 001

or PM me on this forum but mobile is quicker

Vitara Details

Asking price: $3,800 (doesn't take an accountant to figure out I overcapitalised on it somewhat!).

Model: 1991 Suzuki Vitara soft top

Motor: G16A (Carby 1.6 litre)

Odometer: 234,xxx km

Work completed on the car in the last year:

Motor pulled out, crack tested, bored out 25 thou oversize, brand new pistons, rings, bearings, crank polished and tolerances checked.

Head dipped, shaved, valves reseated, new seals etc.

New extractors, catalytic convertor and exhaust.

New alternator, starter motor, heater core, temp sender, oil pressure sender.

New King springs and dampers and poly bushes throughout except for rear trailing arms as these bushes were fine.

Pioneer head unit, new speakers front and rear, amp under seat (sub not included).

New tires done 5000km (including new spare).

New heater core.

Oil and filter change at 1,000km after rebuild and every 5,000km since then. Done 15,000km since rebuild.

Reason for sale: Had this and the 32, sold the 32 used this as daily but upgraded to a dual cab ute to carry baby and pram...porta cot...toys...nappies...bottles...dirty nappies...etc

Pictures: below

GSXR Details

Asking price: $9,999 (or $10,000 with $1 cashback - limited time on the cashback offer)

Model: 2009 Suzuki GSXR 600 K9

Extras: No, totally stock

Odometer: 2,300 km

Reason for sale: I was a moron who let a salesman talk me into buying a new bike....on credit. Paid $13,200 for it only three months ago and simply can't stomach the high interest repayments any longer. Gonna sell and get a cheap bike.

BTW, reason it's a 2009 model but only 3 months old since new is that I bought last years model since I loved the white colour, it's exactly the same as the K10 model but has different colours available.

Pictures: below

post-52798-0-98537400-1294729889_thumb.jpg post-52798-0-25397200-1294729904_thumb.jpg post-52798-0-49476700-1294729933_thumb.jpg post-52798-0-88624400-1294729958_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/349954-2009-gsxr-600-suzuki-vitara/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • Take the fall as a warning sign for future endeavours  Stay safe mate
×
×
  • Create New...