Jump to content
SAU Community

R33 Series 1 + 2 Parts To Clear

sus 32
 Share

Recommended Posts

sus 32 Collaborator

sus 32

Posted
Posted (edited)

Hi there guys and girls, i am currently parting out a Black 2 door R33 S2 Skyline. i have sold the engine, gear box, suspension, and brakes but most of the other gear i still have around the place. i also have parts from a S1 RB25DET which i was in the process of rebuilding, but moneys an issue, so parting it out

  • RB25DET Head (stock condition and in very good condition, comes with rocker covers and valves etc, no plenum or coil packs or exhaust manifold) $250
  • 2x RB25DET Lower portions of the intake plenum (part that bolts onto the head) $75 each
  • RB25DET alternator $60
  • RB25DET Power Steering pump with bracket $100
  • RB25DET Throttle body $50
  • Stock BOV $30
  • S1 RB25DET coil packs (working order) $100
  • 2x Apexi BOV $50 each
  • Manual Brake pedal $20
  • Manual Clutch pedal $20
  • Slave cylinder, lines and piston (that pushes on the fork) $30
  • R33 overflow bottle $20
  • Engine fuse box cover $10
  • Complete Front hubs with upper control arms $70 each (got both Rh and Lh)
  • Drivers side Rear tail light (white in colour) $60
  • Windscreen wiper motor $15
  • Passenger airbag (not deployed) with wiring $100
  • Air bag module $60
  • Stock R33 rear strut brace (silver with red SKYLINE writing) $100
  • 2x Rear Hicas units $30 each
  • RB25 engine cross member $100
  • S2 steering wheel with airbag (un deployed) gd condition $140
  • A pillar plastics (2 sets) no holes $20 each
  • HKS (J tank) inter cooler (smaller intercooler, bit of fin damage) $100 with piping
  • Apexi Radiator (with apexi radiator cap, slight fin damage) $200 ono
  • S2 glove box and surround $40
  • Rubber manual gearbox boot with steel ring $30
  • Stock front and rear sway bars $40 each
  • Passenger side mirror (white in colour) $40
  • S2 black front grill $80
  • Rear garnish - part between tail lights $50
  • RB25 12psi turbo actuator $50
  • Pod filter adapter (to put a large pod filter on) $30
  • Black drivers door handle $20
  • Space saver $50
  • Black boot lid with s2 wing $150
  • Stock R32 GTST springs (good to get off defect) $100 for all four
  • Earthing Kit (Hot Earth) $50
  • A/C Fan $100
  • S2 front guards (2x White and 1x Black) $100 each
  • S2 Front and Rear seats (perfect, apart from small hole in drivers side) $200 the lot
  • S2 Ash Tray $20
  • Drivers power window switch (no surround) $40
  • Passenger door window switch $40
  • Electric side window switch $30
  • Petrol flapper door (white) $10
  • Passenger door, with glass (black) $120
  • Rh adjustable Castor rod (unknown brand) $40
  • Rear Quarter Panels with side glass $400 a panel
  • Rear windscreen $75
  • Door seals (good condition) $20 each
  • Bonnet latch cable $20
  • Boot latch cable $20
  • Stock fuel pump $30
  • Steering column with barrel and key $75
  • Complete s2 floor carpet $50 (no holes)
  • s13 Silvia 4 stud rear hubs, rotors and brakes $100
  • All interior plastics as well

i have lots and lots of parts, so shoot me a pm and just ask or if you want pictures of anything again happy to get some for you. Happy to post at Buyers Expense Cheers Ty :thanks:

Edited by sus 32
Link to comment
https://www.sau.com.au/forums/topic/350873-r33-series-1-2-parts-to-clear/
Share on other sites
koduRB25det Community Regular

koduRB25det

Posted
Posted

Mate,

Manual Brake pedal $20<LI>Manual Clutch pedal $20<LI>Slave cylinder, lines and piston (that pushes on the fork) $30

they mine. if you got them. belive they in good condition. how much postage 4 sydney 2113. please pm

sus 32 Collaborator

sus 32

Posted
  • Author
Posted

HKS front mount - Sold

1X washer bottle - Sold (one to go)

S2 Ashtray - Sold

A/C Compressor - Sold

S2 power antenna - Sold

most other parts still up for grabs!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...