Jump to content
SAU Community

Recommended Posts

for sale is a Brand New In Box Jim Berry Full Monty Race Clutch that i purchased a while back for an engine build that got cancelled.

Clutch is single plate button type, rated to over 800hp. 4400 pound clamp load.

will fit in a TT or NA Z32 gearbox!

Size, Spline OD & No. of Teeth 240 x 25.5 x 24

comes with clutch centre, pressure plate, thrust bearing and oil seal.

i paid $1450 for this clutch.

ideal for anyone going to make some decent power but still wants good driveability

here is website link

http://www.motorsportworld.com.au/outlets/raceclutch/

asking $1200 posted aus wide

Edited by lobsta

Any idea if this will fit other models, 33 to be precise?

it has the same physical size, spline outside-diameter and number of teeth so it would fit fine.

these can be verified on the exedy website under 'clutch finder'.

cheers

rob

Edited by lobsta

Don't bother Neil, i bought it today :-D

Lucky bastard!

I'm ordering my Full Monty on Monday. Except this one will cost me abit more...

Let me kno how she is to drive. I'm curious how 4400 lb will feel on the pedal.

Lucky bastard!

I'm ordering my Full Monty on Monday. Except this one will cost me abit more...

Let me kno how she is to drive. I'm curious how 4400 lb will feel on the pedal.

Will be a few weeks away yet, still gotta have have some things done to finish off the 3540 upgrade im doing.

Isn't this dependent on Push/Pull type?

Thanks for scaring the shit out of me!

After you mentioned this i thought i better do some of my own research (which i should have done before i bought it), found out that a z32 N/A clutch will fit a 33 but not a turbo z32 clutch, then found out that the turbo z32 is 10mm bigger, paniced and then remembered that the clutch and tape measure at 15 feet away, turns out it is the N/A 240mm and not the turbo 250mm, everything else is the same including all being push type, could have been an expensive lesson tho.

For the record 32 and 33 gtr and 34 gtt and C34 stagea is pull type, the 34gtr is also pull but bigger that the others.

Edited by W0rp3D

For the record 32 and 33 gtr and 34 gtt and C34 stagea is pull type, the 34gtr is also pull but bigger that the others.

Only late model 32 GTR's. Fitted with the larger rims, Brembo brakes etc.

The first few years of R32 GTR used Push type.

It can be modded eitherway but you gotta drill and tap your bellhousing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...