Jump to content
SAU Community

Recommended Posts

Hey Guys,

Due to a change of plans im selling a set for Drift performance racing seats (in red carbon fibre type)currently they are in my R32 GTR as a tight fit. These seats should also fit other type cars but you will have to get yourself the correct rails and runners to match as Drift have discontinued these.I also have a set of custom rails made out of R33 GTST rails meaning they should fit R32 GTST up to R33 GTST,(rails will be included with the seats).However be warned because the rails are custom made they will not be ADR approved!

Price:$600 for the pair (will not separate)

location:Sydney

conditions: Pick up only (due to the size and weight)

driftone.jpgseat_carbonfibre_schematic.jpg

Drift website: http://www.shopdrift.com/Products/D1-2002D-RCF/RedCarbonFibre%28Driver%29.aspx

For more info contact your local Autobarn store (Distributors of the Drift brand)

post-1164-0-83347200-1295520388_thumb.jpg

post-1164-0-97867900-1295520400_thumb.jpg

post-1164-0-23045900-1295520410_thumb.jpg

post-1164-0-54860100-1295520416_thumb.jpg

FYI these are selling $400 a pair from autobarn

Thanks for the input...but my price is $500! if you take a closer look they are similar to mine but not the same. Mine are of the older model type youll also find that the rails and sliders are not included seeing as they are no longer made.(Youll need that to get these seats in after you pay $400)Autobarn may sell you the autotecnica universal sliders that may or may not fit but then youll need the mounting brackets depending on the car...good luck!,so id laugh at $400.

  • 2 weeks later...
  • 1 month later...

got a few peeps message me about seats/rails complete if they dont buy....

ill rock past your shop during week show you the rails if your still interested there yours!

sorry i should of explained myself bit better..due to the size of the seats (height/width compared to standard)there isnt much room.

yeah id be keen...if they are R32 GTR seats

Yeah can see it on photos. I would be looking to buy them of u cash $450 , as I have been advised to keep standard ones , sorry mate. Let me know when I can pick them up? Everything included to go straight into my r32?

Thanks

Yep i took them out of my car... i can email you pics if you want, pick can be arranged anytime after 6pm during the week or anytime w.e

Edited by Hiroshima Screamer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...