Jump to content
SAU Community

Recommended Posts

Hey Guys,

Due to a change of plans im selling a set for Drift performance racing seats (in red carbon fibre type)currently they are in my R32 GTR as a tight fit. These seats should also fit other type cars but you will have to get yourself the correct rails and runners to match as Drift have discontinued these.I also have a set of custom rails made out of R33 GTST rails meaning they should fit R32 GTST up to R33 GTST,(rails will be included with the seats).However be warned because the rails are custom made they will not be ADR approved!

Price:$600 for the pair (will not separate)

location:Sydney

conditions: Pick up only (due to the size and weight)

driftone.jpgseat_carbonfibre_schematic.jpg

Drift website: http://www.shopdrift.com/Products/D1-2002D-RCF/RedCarbonFibre%28Driver%29.aspx

For more info contact your local Autobarn store (Distributors of the Drift brand)

post-1164-0-83347200-1295520388_thumb.jpg

post-1164-0-97867900-1295520400_thumb.jpg

post-1164-0-23045900-1295520410_thumb.jpg

post-1164-0-54860100-1295520416_thumb.jpg

FYI these are selling $400 a pair from autobarn

Thanks for the input...but my price is $500! if you take a closer look they are similar to mine but not the same. Mine are of the older model type youll also find that the rails and sliders are not included seeing as they are no longer made.(Youll need that to get these seats in after you pay $400)Autobarn may sell you the autotecnica universal sliders that may or may not fit but then youll need the mounting brackets depending on the car...good luck!,so id laugh at $400.

  • 2 weeks later...
  • 1 month later...

got a few peeps message me about seats/rails complete if they dont buy....

ill rock past your shop during week show you the rails if your still interested there yours!

sorry i should of explained myself bit better..due to the size of the seats (height/width compared to standard)there isnt much room.

yeah id be keen...if they are R32 GTR seats

Yeah can see it on photos. I would be looking to buy them of u cash $450 , as I have been advised to keep standard ones , sorry mate. Let me know when I can pick them up? Everything included to go straight into my r32?

Thanks

Yep i took them out of my car... i can email you pics if you want, pick can be arranged anytime after 6pm during the week or anytime w.e

Edited by Hiroshima Screamer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah I've had too many issues with knock off's on the BMW's. I don't want to do a job twice or more because the parts are shit.
    • I read this and thought "ah! I will do this scissor jack on the tow point thing!" I just use my floor/low profile/costco jack and lift the car up by the tow hook itself, then slide jack stands under. Never thought about using scissor into floor jack combo :p
    • Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
×
×
  • Create New...