Jump to content
SAU Community

Drift Carbon Fibre Type Red Black Racing Seats

Hiroshima Screamer
 Share

Recommended Posts

Hiroshima Screamer Grand Master

Hiroshima Screamer

Posted
Posted

Hey Guys,

Due to a change of plans im selling a set for Drift performance racing seats (in red carbon fibre type)currently they are in my R32 GTR as a tight fit. These seats should also fit other type cars but you will have to get yourself the correct rails and runners to match as Drift have discontinued these.I also have a set of custom rails made out of R33 GTST rails meaning they should fit R32 GTST up to R33 GTST,(rails will be included with the seats).However be warned because the rails are custom made they will not be ADR approved!

Price:$600 for the pair (will not separate)

location:Sydney

conditions: Pick up only (due to the size and weight)

driftone.jpgseat_carbonfibre_schematic.jpg

Drift website: http://www.shopdrift.com/Products/D1-2002D-RCF/RedCarbonFibre%28Driver%29.aspx

For more info contact your local Autobarn store (Distributors of the Drift brand)

post-1164-0-83347200-1295520388_thumb.jpg

post-1164-0-97867900-1295520400_thumb.jpg

post-1164-0-23045900-1295520410_thumb.jpg

post-1164-0-54860100-1295520416_thumb.jpg

Hiroshima Screamer Grand Master

Hiroshima Screamer

Posted
  • Author
Posted

FYI these are selling $400 a pair from autobarn

Thanks for the input...but my price is $500! if you take a closer look they are similar to mine but not the same. Mine are of the older model type youll also find that the rails and sliders are not included seeing as they are no longer made.(Youll need that to get these seats in after you pay $400)Autobarn may sell you the autotecnica universal sliders that may or may not fit but then youll need the mounting brackets depending on the car...good luck!,so id laugh at $400.

  • 2 weeks later...
  • 1 month later...
Hiroshima Screamer Grand Master

Hiroshima Screamer

Posted
  • Author
Posted

got a few peeps message me about seats/rails complete if they dont buy....

ill rock past your shop during week show you the rails if your still interested there yours!

Hiroshima Screamer Grand Master

Hiroshima Screamer

Posted
  • Author
Posted

sorry i should of explained myself bit better..due to the size of the seats (height/width compared to standard)there isnt much room.

yeah id be keen...if they are R32 GTR seats

R32gtrsilver Collaborator

R32gtrsilver

Posted
Posted

Yeah can see it on photos. I would be looking to buy them of u cash $450 , as I have been advised to keep standard ones , sorry mate. Let me know when I can pick them up? Everything included to go straight into my r32?

Thanks

Hiroshima Screamer Grand Master

Hiroshima Screamer

Posted
  • Author
Posted (edited)

Yep i took them out of my car... i can email you pics if you want, pick can be arranged anytime after 6pm during the week or anytime w.e

Edited by Hiroshima Screamer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • bcozican
      WTAC 2025

      By bcozican · Posted

      i will be there 😁
    • patrickxdf12
      Squeaking clutch/throw out bearing

      By patrickxdf12 · Posted

      Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
×
×
  • Create New...