Jump to content
SAU Community

Brendans 260Rs

Brendan260RS

By Brendan260RS,
in Four Door Family & Wagoneers

 Share

Recommended Posts

  • 3 months later...
wagzilla Contributor

wagzilla

Posted
Posted
stageanewpaint002.jpgvery nice 260rs, I have a 260rs also. I put on the 2859r turbo's tomie 600cc and tomie pony cams 260 full exhaust....working on reprograming my computer and the next thing is new mafs nismo so that is about a $1000.00 bucks and I should be done for a while.
260rsstagea Community Regular

260rsstagea

Posted
Posted

stageanewpaint002.jpgvery nice 260rs, I have a 260rs also. I put on the 2859r turbo's tomie 600cc and tomie pony cams 260 full exhaust....working on reprograming my computer and the next thing is new mafs nismo so that is about a $1000.00 bucks and I should be done for a while.

nice bay! where did you get the carbon fibre panel from at the front?and is that a kansai strut brace? was that made for stagea specifically or did you just buy a 33gtr one?

CruisingFast Collaborator

CruisingFast

Posted
Posted

nice bay! where did you get the carbon fibre panel from at the front?and is that a kansai strut brace? was that made for stagea specifically or did you just buy a 33gtr one?

Yeah I want one of them Kansai strut braces myself, I've got a thread asking if the R33GTR works, can you please check if it has a part number or something we could use a reference point? I've done a little searching and can't find one that states for Stagea and looking at other strut braces that are for R33 and Stagea the model numbers are different. Fingers crossed the Kansai fitted on your car has the same part number as the R33 bar! If not at least it's a step closer to knowing what to ask for when i start hitting up the Japanese part suppliers

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      M35 Aftermarket Fuel Pump

      By MBS206 · Posted

      Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...