Jump to content
SAU Community

Recommended Posts

Hi, up for sale is my 1999 V-spec R34 GTR in showroom condition.

Engine is 5000km old with 2000 of those going through stages of running in. Never tracked.

Currently has 600.7rwkw on e85, with saved tunes for both bp ultimate and e85

All aftermarket parts used were new.

Engine Mods include:

- 2.7 l stroker kit with billet conrods and crankshaft

- HKS T51R Kai Single Turbo conversion

- Extended sump

- Nitto oil pump

- n1 water pump

- ARP bolts

- ACL race series bearing

- ATI harmonic balancer - 1000hp

- Full Port and polish of head

- Mines Triple Flow cam cover baffle plates

- Tomei procams

- Tomei valve springs and retainers

- Tomei Valve lifters

- Tomei gasket kit

- Supertech 1mm oversize valves

- Billet twin entry fuel rail

- Sard Big capacity Fuel Pump

- 2 bosch 044 external fuel pumps and custom surge tank

- Adjustable Fuel pressure regulator

- Bosch 1680cc injectors

- Nismo twin plate coppermix clutch

- Greddy intercooler

- Greddy hard piping kit

- Greddy oil cooler

- PWR Radiator

- Vipec ECU

+custom piping, hosing and carbon fibre bits

Suspension & Brakes:

-Brembo Gran Turismo Front big brake kit - not pictured

-Greddy coilovers

-Greddy in car electronic damper adjustment

-ARC racing stabilizers (swaybars) - Front and Rear

-Cusco camber adjustable rear upper arms

-Cusco front negative arms

Interior:

-Alpine 7inch double din head unit

-DLS 6.5in splits

-DLS 3 Channel Amp

-DLS Magnesium Sub

Also:

-Kakimoto stainless steel exhaust

-Rays Volk GT-C face 2 19x10.5 rims

-Nismo z-tune body kit

-Nismo 320km/h speedo with 9k km on it ... Stock one will also be given

-Nismo L.E.D tail lights

Huge amount of money has been thrown at this car but time to move on and start a new project.

SAU Price: $78000

Please genuine enquiries only, pm me as i do not check threads often

post-48719-0-92653000-1296114229_thumb.jpg

post-48719-0-95840000-1296114251_thumb.jpg

post-48719-0-16851200-1296114266_thumb.jpg

post-48719-0-83459800-1296114279_thumb.jpg

post-48719-0-06549100-1296114298_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/351885-r34-gtr-v-spec/
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...