Jump to content
SAU Community

Recommended Posts

Hi Folks,

i recently acquired simons old 32 4door, and i wanna learn the drifting basics, however i really dont wanna do it on the streets.

just wondering if you guys could give me a run down of what a drift practice day is like? people forgiving when you spin? ect.

Also what do you normally budget for one of these practice days? taking into account Tires, petrol, fee's ect.

any other information would be much appriciated.

thanks all.

i should also mention im no stranger to motor sport, just new to the drift scene

Edited by Stagea_G
Link to comment
https://www.sau.com.au/forums/topic/353276-drift-practice-days/
Share on other sites

Most pepole are quiet good just genral good manuers g a long way u spin get of track let next car pass slowly move back on i runn new tyress each meent i budget around 900 fuel for tow car and drift car new oil and filter an tyres on a budget u could do it easly under 500. BUt always a good night out

Most pepole are quiet good just genral good manuers g a long way u spin get of track let next car pass slowly move back on i runn new tyress each meent i budget around 900 fuel for tow car and drift car new oil and filter an tyres on a budget u could do it easly under 500. BUt always a good night out

Most people are quite good, general good manners will go a long way. If you spin, make sure you get off the track and let the traffic pass. Once traffic clears, slowly re-enter the track.

I run new tyres each meet, and budget around 900 including fuel for tow car, fuel for drift car, new oil and filter, and tyres. On a budget, you could easily do it for under $500. But it is always a good night out.

^^^ lol Damo on the translation :D

But in all honesty Grant, SAU is not a big drifting community - you will find a handful of drifters on here, but the vast majority hang out/post on NissianSilvia.com

You are obviously welcome on SAU, but this sort of thread will get a MUCH larger response on NS.com

The drift days are pretty cruisey, 90% of the people are out there to just have a good time.

As far as spinning out, there is etiquette to it, and generally if you spin out its not cool to sit there and do ringing/static skids mainly because it ruins the persons lap after you because they need to stop/slow down if there is a massive cloud of smoke so if you spin, get out the way asap but hey, every now and then if you loose it and get a bit frustrated a static skid can be good to releive yourself and its not so much of a problem. Everything in good balance man.

Don't bother with 2nd hand tyres IMO - they delam straight away, at the price they cost its not worth it, and then the track time you loose going back into the pits getting them changed etc all the time is wasting money aswell because time out on the track is $$$$$$.

~$100 for a tow out (petrol for the tow car & trailer hire)

~$30 worth of fuel in the drift car?

~$50 new oil/filter each session

$90 entry fee

$10 gate entry fee

$25 cams license (one year license can be purchased for $55 but you need to be apart of a club etc)

~$160 tyres... I can get tyres at $80ea loose brand new so a set usually lasts me a night if I don't do statics everywhere lol (good to carry a 2nd set incase you need to trailer up early due to running out of tyres)

Then you start breaking shit and then it gets expensive >_<

Get onto the drift school session May 7th.

Lots & lots of track time, $150 to enter? close to that but its so so worth it. Get great pointers from the big boys in the drift scene and is a GREAT day out... I did that for my first session ever and I am HANGIN' for the next one... in fact thats when I'll have my car ready again (lots of new goodies)

Good times! :laugh:

Just make sure you keep it fun haha

164770_485643353542_722233542_5943401_7275699_n.jpg

dont scando's into turn 1 unless u want your car to look liks this :laugh:

+1 to what Weezy said, dont be a idoit, there are other people on the track and doing burnouts/donuts just ruins it for them, dont drift around cars that have spun

if you really want to learn going to drift school or a private day is way better, drift school is great for practicing the basics, public days are a waste of money and full of idoits who think they are drift king

f**k ns.

Those cvnts are all proffessional drifters on need for speed underground a think they know all.

SAU needs more drifters on here that are just relaxed and do it for fun. Much Like we already have, so cheers for joining !!

As for an oil and filter change after every prac, that's up to you...I would say every 2 -3 peace pending what sort of oil temps your seeing and what your using...

I personally can't see the point of putting 50 bucks worth if oil over the neighbors fence onto her veg garden after 1

Hours worth of driving...

Tyres defs go brand new, there cheap as hell these days.

Get your cams license, other wise your throwing Monet away.

And make sure your tank is FULL and or get a surge tank

I killed my first RB at my first ever prac...

I generally budget 500 bucks per prac, then just hope like f**k nothing brakes..... Which it will.

:thumbsup:

Yea unfortunately im not a fan on NS.com, certain reasons which im sure most people agree on.

i guess the best way is to just get out and try. but i still appreciate anything, anyone has to say.

Just trying to get to the forum is hard enough these days. Downtime all over the shop since it was redesigned.

Not to mention the malware you get from the site lol.

  • Like 1
  • Nope 1

very one out there is pretty chilled, Yeah static burnouts/ donuts are a big no no, If there are marshals on the track, go slow past them like 25km max.

Yeah about $500 sounds about what I spend each prack, fuel entry tires ect.

If you spin Check if car are coming if you are gonna slow another coming car wait off the track, if you can get back out without slowing anyone down get straight back out.

Servicing I Put-mine up on a hoist check everything is tight before every practice/ comp get the tape measure out check my toe are about right, Change the engine oil after every 2nd or 3rd session depending on what it looks like. I replace tho oil filter after every session tho cheap insurance.

Nah go big scandos into turn 1 youll get good at panel beating

heres what mine looked like after the Jan practice

http://www.facebook.com/permalink.php?story_fbid=110003079075368&id=100001808548760&ref=notif&notif_t=like#!/photo.php?id=100001808548760&pid=155866&fbid=122455327824751

Much straighter now tho

Yeah I have been out to every practice in 2010 and plan to do the same this year as well as doing all the comps, get into it youll have a ball

  • Like 1

Most people are quite good, general good manners will go a long way. If you spin, make sure you get off the track and let the traffic pass. Once traffic clears, slowly re-enter the track.

I run new tyres each meet, and budget around 900 including fuel for tow car, fuel for drift car, new oil and filter, and tyres. On a budget, you could easily do it for under $500. But it is always a good night out.

Sorry about my bad english,

Also 500 is a good figure to budget on,but be aware that u may have breakages clutch,diff,gearbox,turbo.

All in all most pepole are out there for the fun of it and are not going to crack the shit if u spin and ruin there lap, but make sure u dont cut no one of and all will be good.

So when should we excpect to see you out a prac.

To someones comment above drift schhol is awesome i had been out to 3 pracs previously but drift school helped me improve alot and boost confidence.

Cheers bayden

Just don't go out there in a complete bucket of shit. Make sure everything works how you want it too.

I went out there a few times knowing the handbrake was cooked and all I did was spin all day and eventually f**ked the car on the inside of turn 1 ripple. Watch out for that one!

One thing I noticed, people are willing to help you out when they can. I got heaps of help from randoms when I f**ked my car. Just have fun and don't don't shit to serious.

And As Import S13 said be careful of the turn 1 inside ripple strip.

I bent a strut hitting it, several other cars have done suspension damage hitting it.

Evan Daws rolled his R31 a couple of years back hitting it.

Yeah its nasty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
    • OK, so a bunch of trim needs to come off to get to the rear shock top mounts. Once the seat is out of the way, the plastic trim needs to come off. Remove 2 clips at the top then slide the trim towards the centre of the car to clear the lower clip Next you need to be able to lift the parcel shelf, which means you need to remove the mid dark trim around the door, and then the upper light trim above the parcel shelf. The mid trim has a clip in the middle to remove first, then lift the lowest trim off the top of the mid trim (unclips). At the top there is a hidden clip on the inner side to release first by pulling inwards, then the main clip releases by pulling the top towards the front of the car. The door seal comes off with the trim, just put them aside. The the lighter upper trim, this is easy to break to top clips so take it carefully. There is a hidden clip towards the bottom and another in the middle to release first by pulling inwards. Once they are out, there are 3 clips along the rear windscreen side of the panel that are hard to get under. This is what the rear of the panel looks like to assist:
×
×
  • Create New...