Jump to content
SAU Community

Recommended Posts

ok guys have my cefiro up for sale complete shell its asking for a motor and box put in her.

mods.

r33 5 stud upgrade r33 brakes new rotors.

040 fuel pump

full uras body kit.

stock suspension

shitty wheels to get it rolling.

hicas lock bar

full 3 inch exhaust 1 muffler and canon.

interior is complete besides drivers seat.

excellent condition inside. missing stero suround

bubble in dash.

has been regoed before in vic,

it can be registered no problem was before with a rb25.

has all complicance plates, viv, etc etc.

asking 4k includes above mods and rolling.

can include: for extra $$$

poteza coilovers 6/8 adjustable everything $700

rb25 forged engine $3k

gold 17x8 &9 +28 wheels. $700 with brand new tread.

has all the necessary items in the bay to fit any rb.

paint is excellent except on door peeling a little. thats all

located in hoppers crossing victoria.

sms me 0430078630

post-47637-0-31729400-1297747843_thumb.jpg

post-47637-0-40427000-1297747846_thumb.jpg

post-47637-0-11977300-1297747849_thumb.jpg

post-47637-0-97363800-1297747868_thumb.jpg

post-47637-0-55320800-1297747871_thumb.jpg

  • 1 month later...

gday there champ , how you doing , interested in your rolling shell but a fair bit out of my price range as i really only need it for a passenger side rear quarter and bonus if its got a front windscreen in tact with no cracks watsoever !

your ceffy from the outside doesnt look to bad at all man , how come your parting out the engine / driveline and would rather sell it complete , unless your keeping the goodies for another project you have lined up man hehe :)

maybe if you can work out a deal for me and take off a few bits and pieces and drop the price somewhat , i am willing to drive down and bring my trailer to pick it up from your hands man at the rite price

hope we can sort something out

cheers anthony

Hey mate sorry haven't got back to you..

Yeah I guess I can remove the full 5 stud and front guards to make it cheaper but that's all really and yeah front screen is good and everything else you wanted....I guess I can strip the inside too make it even cheaper.ill Get back to you within the next couple days with a price

drift racing havent got back to me so still for sale.

so price drop to 3k without 5 studd and front guards.

or

swaps for a tandem car trailer.

  • 2 weeks later...

ok very last chance to buy it before my mate buys it so final non neo offer is

for 3k you get:

no front guards

no 5 stud. will supply 4 studd maybe

no wheels.

yes coilovers all around,

yes full exhaust.

yes reo.

yes full body kit.

for 4k.

you get all the above and might be able to put shitty wheels all around.

offer is for this week only till friday

sms or ring 0430078630

3k for a roller on stock suspension and missing shit... drug money man. go on boostcruising. rollers go for 700-2000 complete usually with coilovers. I paid 1000 with s14 5 stud incluing lca and a 2way.

Do you actually have any interest in buying the car? If you don't like the price, and have no intention buying it, why even comment. So what if the price is higher than others? A simple pm would have sufficed if you really wanted to suggest his price may be hard to acheive, instead of talking shit in his thread, at least your giving him free bumps.

^^^thanks I still think its a good price all things I included in the deal I sold it for...

5 studs. Worth $800-$1000

coilovers $600-$800

Body kit $500-$700

Fresh respray $2000

Interioir all in contact besides drivers seat.

all it needs is a motor and box for 1.2k and then register it maybe another $300 for that so for extra 1.5k you have a road registed cefiro for under 5k that's a bargain

Due to the fact that cefiro's are alot rarer here in vic than in bris determines the outcome of sale price,

I looked at a heap of cheapies in qld forsale, but by the time you got them transported, sorted out rego it wasnt worth it.

That said mine came from Adelaide, but still a vic rego'd car.

For the sake of argument i've never seen a rolling cefiro for $700 - 2000 anywhere in australia that didn't need alot of work - there was one on boost last year for $700 but it was a POS.

This one looks super clean, and given what people ask for skyline and silvia shells which are a dime a dozen this is a bargain..

thanks esky_mad.

yeah i haven't seen many ceffy shells at all for sale.

new owner will be happy as with this purchase..

thanks everyone for you positive input...:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...